Sending multimedia messages is one of the ways to send files to another subscriber. mobile phone or email. Messages contain audio, video, photos or other files, the maximum size of which does not exceed 1 MB.

MMS can be sent not only to subscribers of Beeline Russia, but also to users of any operator located both in the territory of the Russian Federation and abroad.

To access the Internet and activate the MMS function, you need to subscribe to a package of three services. It includes MMS, GPRS, WAP. Last service will not be needed, since it is relevant only for outdated phone models.

You can check whether your phone supports receiving / sending MMS messages by reading the instructions for your mobile device.

Connecting mobile Internet and multimedia messages - the necessary options. To activate MMS service without Internet, dial toll free number and follow the instructions.

To install the MMS service from Beeline using a USSD request, use the command to connect: * 110 * 181 # ... Then follow the instructions written on the phone screen.

Setting up MMS messages on Beeline

You can set up receiving and sending MMS messages by calling the number. Also, you can connect the service in the personal account ( Personal Area) on the Beeline website. Service name - Internet access and MMS.

The mobile phone should be connected to the Internet automatically after activating the SIM card. However, if it is not available, it is recommended:

• dial the combination * 110 * 181 # ... The phone screen will display information about whether the "Internet Access" service is activated;
• call the number where you can get automatic MMS settings. To save them, enter the password - 1234 .

Automatic configuration of MMS messages on Beeline

After you have set up multimedia messages, you must enter the correct data to be able to read and send MMS.

It is required to perform the following series of actions:

1. Follow the link. Here you can order automatic settings MMS on the official Beeline website.
2. To get the settings, you need to know your phone model. Enter the model name or select it from the drop-down list.
3. Press the MMS key, then tap “Yes, go to settings”.
4. You can get them by clicking on the "send settings" button. If your mobile phone does not support this function, use the manual setting after reading the instructions and strictly following it.

The received data should be applied and then the phone should be rebooted. To download automatic Internet and MMS settings, you need to call the number -. The call is free.

After the device restarts, you can send and receive MMS.

Manually Configuring MMS Messages for Android Phones

To send and receive multimedia messages, you must enter the correct information. MMS settings are set in automatic mode when inserting a SIM card into a mobile device.

However, there are certain reasons why the message could not be created. In this case, you need to manually configure MMS on Android. In settings mobile device should create new profile and enter the data below:

• profile name - Beeline MMS;
• the original page is http: // mms /;
• data transmission channel - GPRS;
• access point - mms.beeline.ru;
• proxy server address - 192.168.094.023;
• for outdated phone models, the proxy port address is 9021, for newer ones - 8080;
• the authentication type is automatically selected - this is PAP;
• user and password are beeline.

Today, the MMS service is no longer something unusual and new, remains one of the most popular, because it allows you to transfer files with maximum convenience, including photographs and various images.

Many users deliberately try to choose exactly those operators cellular which provided for batch mms messages. For example, the MTS company has packages for ten, twenty, or even fifty messages offered to customers, MMS + is a discounted service, and special tariff plans with unlimited MMS messages. There is even a free MMS show in the arsenal!

You have to set up MMS on Android for two reasons:

• Purchase of a new smartphone;
• If the settings have been reset to factory defaults.

In any of these cases, you will have to change the configuration for the service to work. This can be done in 4 ways.

Automatic tuning

Here, as the name suggests, our participation is minimal, which is very good. The bad news is that you can use this setting only once - when the device is first registered in the network of the selected mobile operator. After that, everything should already be configured, and, as a rule, you do not need to re-receive data. The algorithm of our actions is as follows:

• Installing a SIM card;
• Turning on the device (if necessary, enter the pin code). After registration is complete, the required values ​​are searched for in the database of your operator, and the information is sent to your device.
• After receiving the configuration profile, we accept it and save it. Automatic configuration is complete.

Operator assistance

This method, like manual input, can be used an unlimited number of times. But! As you understand, it will not work exactly to sit on the fifth point, since you will have to perform certain manipulations.

Each operator mobile communications has a consultation number (the service is free of charge):

• Beeline - 0611;
• MTS - 0890;
• Megaphone - 0550;
• Tele 2 - 611 (or 679);
• Motive - 111.

Further, following the instructions of the automatic informant, we establish a connection with the operator, and order the necessary settings, accept them, and save. Then we reboot the device. Sometimes the service needs to be activated, then we call again and ask the operator to activate the service on this number. This completes the MMS setup.

Configuring mms on android on our own

What if I can't get through to the operator? In this case, you will have to act independently and set the settings manually.

Step by step it looks like this:

• We go to the application menu;
• We select the item "settings";
• Go to the opened menu in the "network" (on some devices "more");
• We choose "mobile networks";
• Go to "access points", tick "mobile data";
• We get to the section "Internet access points", click on "new access point";

We perform the following actions in accordance with those indicated in the table:

	Beeline	Megaphone	MTS	Tele 2	Motive
Name	Any	megafon	Any	Tele2 mms	Motiv MMS
Access point (APN)	mms.beeline.ru	Depends on the tariff plan	mms.mts.ru	mms.Tele2.ru	Not set
Username (login)	beeline	empty	mts	empty	motiv
Password	beeline	empty	mts	empty	motiv
MMSC	http: // mms /	http: // mms: 8002	http: // mmsc		http://mms.ycc.ru
MMS proxy (IP address)	192.168.094.023	10.10.10.10	192.168.192.192	193.12.40.65	172.16.2.10
MMS port	8080	8080	8080 (on some 9201 models)	8080 (9201 for WAP1 version)	8080
Access point type (APN type)	mms	mms	mms	mms	mms

We leave the rest as it is. Please note that some devices have a "save" function. After installation, we reboot the device.

We order settings on the website of the operator of a specific region

To use this option, we change our phone to a computer, connect to the Internet, find the page of our operator through a search engine. We select the desired model of the sartphone, enter our mobile number and captcha. We press "send". Within a few minutes, we receive information, save it, and install the necessary profiles. Upon completion of the process, we do a complete reboot of our device.

If it still does not work, then you need to look for an error, as a rule, in your actions.

In our material, which you read carefully, we talked about all possible ways MMS settings for android for different operators. Obviously, there is nothing super complicated in coping with the described process yourself. Follow the instructions in the instructions and enjoy the possibilities of the popular MMS Messenger. Good luck!

Despite the fact that text and, especially, multimedia messages are slowly becoming obsolete, being replaced by the use of all kinds of instant messengers, such services are still in demand among cellular subscribers. They are simple, fast, and fairly democratic. At the same time, if instant messengers need to be installed, configured and searched for your friends / acquaintances / colleagues in them, messages are available to us, it would seem, by default, and you can send them to any number from the contact book or outside of it.

However, sometimes problems arise with sending MMS and SMS, and in such cases additional configuration may be required. And today we will just consider this issue, as well as figure out how to get SMS and MMS settings on Beeline.

Setting up SMS messages on Beeline: step by step instructions

If suddenly you encounter any problems when sending text messages, or they are not sent at all, you can correct this situation by checking the correctness of the settings specified in the phone. In order to verify the correctness of the settings, you should perform the following actions:

1. Go to the folder with the message on the device you are using.
2. Click on the "Settings" button.
3. Find the item with the SMS center number.
4. Enter the number in the appropriate field +79037011111 .
5. Save your changes.
6. Reboot your device.

After completing these steps, SMS messages will be sent correctly. If you are using iPhone, the number of the SMS center for the correct sending of messages can be configured in another way:

1. Open the Phone app (standard dialer).
2. Go to the "Keys" tab in the status bar to dial the phone number.
3. Enter the combination in the format *5005* +79037011111# .
4. Reboot your device.

Automatic configuration of MMS on Beeline

If you are faced with the task of setting up multimedia messages that do not work correctly on the device, then the first step is to try to order configurations in automatic mode.

To automatically configure mms messages, Beeline subscribers need to enter a USSD format combination on their phone *110*181# ... The settings will be sent to the phone in a reply message, and they will need to be applied. In addition to the settings for MMS, the phone will also receive configurations for the correct functioning of the mobile Internet.

Manual setting of MMS on Beeline

If suddenly the automatic settings did not "make" the multimedia messages work correctly, you must configure the device yourself. To do this, you must manually set the parameters for the correct operation of the mobile Internet.

Manual setting of mms on Beeline for Android devices

To complete the setup procedure, subscribers need to go through the following points of their gadget:

1. Go to the main menu of the device.
2. Open the section with configurations.
3. Go to the "More" tab.
4. Launch the category "Mobile communications".
5. Open Data Transfer.
6. Launch Access Points.
7. Create a new access point.

For a new access point, you must specify the following parameters ( all data is entered without using quotes):

• The first parameter to be filled in is the name of the new setting. Here you should indicate “ Beeline Internet»;
• Next, go to the section for entering the APN point, as which you need to specify the address internet.beeline.ru;
• Fields such as "Proxy" and "Port" should be skipped, leaving the fields as they are;
• For the username and password, enter the same parameter “ beeline»;
• The next 5 points also need to be skipped, leaving the fields as they are;
• The parameter “ PAP»;
• In the field below, assigned to the ALP type, the parameter “ default»;
• The protocol for the APN point is IPv.

After entering all the parameters, they must be saved and the device rebooted.

Manual setting of mms on Beeline for iPhone

If you are using a device controlled by operating system iOS, that is, iPhone or iPad, the procedure for setting up MMC will look somewhat different. Before you start entering the settings, you need to go to the corresponding menu, and you can do it like this:

1. Go to your phone or tablet settings.
2. Open the main settings section.
3. Go to the subcategory "Network".
4. Tap on "Cellular data network" and start filling in the settings.

For the correct MMS settings, you need to specify significantly fewer parameters, namely, only three:

1. As the APN point, you must enter the same address internet.beeline.ru.
2. As a login or username - beeline.
3. As a password - a similar parameter “ beeline».

Video tutorial for setting up MMS on Beeline for iPhone

After saving the settings, you can start using MMS on Beeline.

MMS cannot be called the most popular service from mobile operators... But sometimes it is the only way to transfer multimedia files to another subscriber. MMS has a lot of advantages - no need to upload files to hosting sites and file sharing services, no need to bother with addresses Email... You just need to provide the recipient's phone number and the files will hit the road. MMS is the perfect tool for sending videos and photos to friends and family.

Through MMS, you can send not only photos and videos, but also many other files, for example, audio recordings. The main thing that the total size of all forwarded files did not exceed 500 Kb- this is the limitation on the maximum size of MMS messages. You also need to understand that the phone of the receiving subscriber must be able to receive MMS and have the appropriate settings on board. Otherwise, he will receive a link to view the received message from the computer. In addition, MMS can be sent to an e-mail address - but the return sending will fail.

The delivery time for MMS in the Beeline network is limited to 72 hours. You can send MMS from Beeline to the phones of any Russian operators... MMS are also sent abroad, but not every recipient operator supports this service. Besides, some operators limit the size of MMS to 300 Kb. IN this review we will consider all the issues related to setting up MMS on Beeline and figure out how this multimedia service works.

To use MMS, you need to connect the so-called "Package of three services" which includes MMS, GPRS and WAP. You can forget about WAP access forever (it is only relevant for the owners of ancient phones), but GPRS and MMS are just what we need - access to mobile internet and MMS service, which works over an Internet channel. Activation of the "Package of three services" is carried out USSD-command * 110 * 181 #... After that, the subscriber will only have to make the appropriate settings.

How to set up MMS on Beeline

In order for the phone to be able to receive and send MMS messages, it needs to be configured. In most cases, the settings are set automatically, as soon as a SIM card is inserted into the device. Besides, settings can be ordered by calling 060432 (call is free) or by choosing your phone model on the settings page (on the Beeline website). If this does not help, we carry out manual settings MMS- for this we create an MMS profile and enter the following data:

• Profile name - Beeline MMS;
• Home page - http: // mms /;
• Data channel - GPRS;
• Access point - mms.beeline.ru (without http: //);
• Proxy address - 192.168.094.023;
• Proxy port - 8080 (9021 for old phones);
• Authentication type - PAP (most often this type is the default);
• Username - beeline;
• The password is beeline.

The setting item names may differ depending on the make and model of your phone.

As soon as the entry of the settings is completed, the phone needs to be rebooted. After that you can start sending MMS.

How to send MMS to Beeline from your phone

Sending an MMS from a phone is the same as sending an SMS - select the item "Send MMS" or "Send message"(some models have automatic message type recognition), attach required files and click on send. The phone will then establish a connection and start sending files. In order to be sure that the files have been sent and have been delivered, set the delivery notification request in the message settings (you can also read it).

How to send MMS on Beeline for free

Unfortunately, send MMS to Beeline for free will not work- Beeline has closed the ability to send free messages from its site. In order to send MMS from a computer, you need to log in to the MMS-portal service, register and receive a password, and then enter the system. But sending MMS via MMS-portal will be paid... If desired, subscribers can use third-party MMS sending services, but it is undesirable to use them in order to avoid getting the sender and recipient numbers into spam databases.

How to watch MMS on Beeline

In order to watch MMS on Beeline via the Internet, you need to follow the link that came in the SMS(This is how MMS is received by subscribers who do not have this service configured. MMS is delivered to phones that do not support MMS reception in a similar way). Just enter this link into your browser and you can view the contents of the received message. In addition, you can view the contents of the received MMS on the MMS-portal Beeline.

Reading messages, sometimes, we do not feel the emotions that the interlocutor conveys in his message. And all why? Yes, because most mobile operators limit the number of characters and words that users can exchange. It is for such cases that the MMS service was developed - a multimedia messaging service. In order for the subscriber to be able to receive or send such messages, it is necessary to set up his mobile phone. This is what this article is about - how to set up MMS on Beeline.

2 ways to connect mmsok settings to Beeline number

MMS is an extended version of a regular message, into which an audio or video file, as well as photos or other pictures, are uploaded. The size of the message should not exceed 1000 characters and with an attachment, occupying memory no more than 500 KB.

Beeline stopped automatically connecting this option to all numbers - if they want to use it, subscribers independently connect the service in their phone. To do this, they can use one of the following methods.

Automatic settings for multimedia messages

The easiest and shortest way to order such settings is request them by phone number * 110 * 181 #, which is done free of charge from the phone to which you plan to connect the option.

Also, as an option, sequential actions on the list:

Attention! The service is activated on the phone only after it is restarted.

Manual service setting

Not all phone models have the ability to request automatic settings, but do not be upset, now we will tell you how to do this procedure manually.

First, you need to create a separate MMC profile on your phone in the settings, in which you need to fill in the following fields:

Leave all other fields blank. Save everything you entered and reboot the device.

If you haven’t had time to try the option and don’t know how to do it, then the next section will obviously come in handy for you.

Sending MMS from a smartphone to Beeline: how it happens

In order to send a multimedia message to the interlocutor, it is enough to act as when sending a regular SMS. You attach some audio or video files only to a regular message, which turn it into MMS.

Today, the function of sending multimedia sms is supported by almost all phones on platforms Windows Phone, IPhone or Android.

But still, on some older models (for example, the ancient Samsung A300 or the old Nokia 1100) sending such messages is not supported, just like the ability to open them.

What is the price of MMS and is it possible to send messages for free?

The cost of all multimedia messages depends on those tariff plans to which this or that number is connected.

Earlier, Beeline subscribers had the opportunity to send free MMS from the mms.beeline.ru portal, having previously registered on it.

All incoming messages received before and outgoing messages to other users are immediately opened.

But recently, free messaging is not supported by the Beeline network. This can be done only through special services on the Internet, but this must be done very carefully, since there is a high probability of putting your number in the spam lists.

Do I need internet when sending MMS?

MMS messages are sent independently of the World Wide Web. All data exchange takes place over a regular mobile network.

Why isn't the multimedia message being sent?

There may be several reasons for this:

How to open a message with attachments on your phone

Now let's figure out what to do if the MMS was sent to you.

In order to open a message, you also need to have MMC settings in your device. Upon receipt of such a message, you will receive a link in an SMS notification by which you can familiarize yourself with the contents of the message.

Subscribers are given up to 3 days for this procedure, after which the message is automatically deleted.

Attention! Some subscribers may be surprised to receive a notification that there is no data connection after they follow the link. The reason for this may be a failure in the settings. Therefore, it is worth comparing them with the parameters that we described above.

Final word

Moving in step with the times, many managed to abandon MMS and in vain. This type of information exchange does not depend on traffic and at any time, in the absence of an Internet connection, users can send their loved ones a message, which will be decorated with an emotional picture or a wonderful audio composition.