Computer technology penetrates into human life, and today even older people master tablets, smartphones, and other electronics. To get the most out of a new device, it must be connected to the Internet. For an experienced user, this will not be a problem, and less savvy users may wonder how to connect a tablet to the Internet. Everything possible ways, as well as probable problems and solutions will be described below.

Connecting via Wi-Fi is the most common way, so it makes sense to start with it.

Important! Subsequently, to reconnect, you just need to turn on the wi-fi. You will not need to enter the password again, as the device will save it on its own.

Wireless connection problems

If the user wants to connect home Internet to the tablet and uses wi-fi, which is distributed through the router, it may happen that the tablet does not connect to wi-fi, does not see the network, or the device is connected to Wi-Fi, but there is no Internet. This could have happened for a number of reasons.

  1. If the device does not turn on Wi-Fi, then most likely the "Air" mode is activated. In this case, all modules are simply disabled. You need to turn it off in the tablet settings or by lowering the curtain down, there is a corresponding icon.
  2. A tip that any user will surely try first of all -. It sounds corny, but it often helps.
  3. On a tablet date and time settings are incorrect... The problem is rare enough, but sometimes it happens. The solution is to check the correctness of the data.
  4. If the tablet does not connect to Wi-Fi and says that wrong password, you just need to re-enter it. Maybe someone changed the settings of the router. To do this, select the saved Wi-Fi network and click on the forget item. The device will delete all data on it, and the user needs to reconnect with a new password.
  5. The next problem implies failure of the Wi-Fi network itself... It so happens that the device is connected to the network, while there is no Internet. Check the connection on another machine. If there is no Internet connection, then you need to wait until the provider fixes the problem.

  6. If a the settings on the tablet are out of order, then you can check this with a simple utility Wi-Fi Fixer, upon request in Play Market it appears first in the list. The program checks the network and fixes the problem itself. The user only needs to download it. The device must be rebooted before attempting to access the network.
  7. Extreme situation - resetting the tablet to factory settings... You need to resort to such a solution if it became clear that the password is correct, the date is correct, the wi-fi is working correctly. It is recommended that you save all data on your tablet before performing this step, as it will be deleted. After that, go to the device settings and select the "Restore and reset" item. The procedure will take some time, you should make sure that the device is connected to power and will not sit down in the process. While the tablet is recovering, it is not recommended to press anything or touch the device at all. By the way, this method helps to solve the problem when the Internet on the tablet disappears. This can also be caused by a crash. If after the reset everything remains the same, then you should contact the service for diagnostics.


  8. If it became clear that the Internet was not working, and a call to the provider revealed that the problem was not on the line, then you need reinstall the router... To begin with, you should try to press the "reset" service button on the router itself. It is usually called "Reset", after that we re-configure the router. How to do this, you need to read in the instructions. The task is not the most difficult, but depending on the manufacturer, the sequence of actions can vary.

These are the most common problems. If none of the above helped, then the problem lies in the wireless module of the tablet itself... You can check its operation by connecting to wireless networks that work on other devices. The second option is broken router... This will become clear after re-configuration.

Connecting using a SIM card

The second way to access the Internet is to use a SIM card. This will allow you to use the Internet anywhere. First you need to buy a SIM card for a tablet, there are no special difficulties, it is only important to decide on the size - regular, micro or nano.

Important! Today, universal options are sold where you just need to squeeze the desired size out of the plastic case. If the SIM card is old, then it can be cut or, conversely, inserted into the adapter. All this can be done for free in any communication salon.

When the user has a SIM card and it is inserted into the appropriate slot, you need to set up the Internet on the tablet. This will not cause any difficulties. As soon as the SIM card is inserted into the tablet, in automatic mode SMS messages with settings will come. You need to open them and click the save button. Now it remains to turn on the Internet on the tablet not via Wi-Fi, but via the mobile network.

It so happens that SMS did not come, in this case you can call hotline, and the operator will send the required data. If for some reason this is not possible, then you can make the settings yourself.


What if there is no internet connection? First of all, you should make sure that the SIM card is installed correctly. There is a diagram of how to insert it correctly near the corresponding connector. The card must be inserted until it clicks.

Advice! If the SIM card was inserted with the device turned on, then a reboot should be performed, since not every device supports a hot start.

Other ways of mobile connection

What if you need to go online from a tablet, but there is no Wi-Fi network, and a tablet without a SIM card, that is, this connection method is not meant at all? In this case, you can distribute Wi-Fi from your smartphone to your tablet or use a 3G modem.

3G modems are ubiquitous, but how to connect it to a tablet if the latter does not have a USB input? Option one - buy 3G modem with router function, it costs more, but it is more convenient to use. You can simply connect the tablet to the router and then walk with it throughout the apartment, without having to carry the modem with you. If you already have a modem, then you can do connection via OTG cable ... This is a special adapter from microUSB to USB, which will help you connect not only a modem, but any USB device... The method is suitable for models on Windows and Android.

Modern devices support this option to access the Internet, most likely, you don't even need to install special software. But if this did not happen, then it will come to the rescue PPP Widget utility... Through it, the setting is performed, which was described above for the SIM card. There are no differences here. In some cases, when the modem is connected to the tablet, the software for installing the driver will automatically start, you just have to wait until the process is finished.

Via smartphone

Important! You can distribute the Internet from tablet to tablet in the same way. There are no configuration differences.

PC connection

If it so happens that it is impossible to connect the tablet to the Internet through the phone, for example, the traffic is expensive, or there is no Internet at all on the smartphone, then you can connect the tablet to the Internet through the computer. There are two options - wired and wireless... In the second case, the PC must be equipped with a Wi-Fi module, in which case the MyPublicWiFi utility is required. It is the simplest one, you just need to install it and turn it on. Everything will work automatically.

On Yandex Market

The tablet Huawei MediaPad M5 Lite 10 32Gb LTE on Yandex Market

Tablet Huawei MediaPad M5 Lite 10 32Gb WiFi on Yandex Market

Why the Internet does not work on the tablet is a common search query on the Web. This is due to the fact that today such gadgets have almost caught up with laptops and personal computers by prevalence. Connect your tablet to wireless network Wi-Fi using a router is as easy as doing it through your phone or any other equipment. However, it often happens that errors occur in the process: the connection is interrupted, the data transfer begins to freeze and slow down, and may disappear altogether. These and many other network problems are common, so it is a good idea to know what to do in such cases.

Almost all tablets on the market have several ways to access the Internet. Some are more common, others less.

Here are the main ones:

  • using a wireless Wi-Fi network;
  • via mobile Internet with a SIM card from one of the operators. In this case, the device goes online with one of the standards - 3G or 4G;
  • connecting the cable from the tablet to the computer or laptop.

Note! The most common way for a gadget to go online is via Wi-Fi.

Users start looking for solutions when the tablet does not go online. There are many reasons why it is impossible to connect to an access point. It happens that the Internet does not work on the tablet via Wi-Fi, although there is a connection. In this case, it is impossible to open any page in the browser, some applications cannot function without access to the Web. It is necessary to analyze the main problems with the connection and find ways to fix them.

Doesn't find a junction point

If such a problem occurs, then most likely its cause is in the router itself. Either the router is not connected to the Network, or it has some kind of technical problem.

Quite rarely, but this still happens due to the fault of the tablet, since it can also signal a hardware failure of the network module or a software failure. It is worth trying to restart the tablet and check all the network settings. If everything is in order, but the access point cannot be found, then the problem is definitely in the router.

Can't get network address

Another problem in which authentication is not possible is the difficulty in obtaining an IP address. This indicates a software failure in the gadget. Factory reset, reboot or system update can help.

Important! Most often, when web pages stop opening, a simple restart of the device helps.

There is a connection, but the network is not working

It happens that it is possible to connect to the access point, but feedback not. In this case, the cause may also be a problem with both the router and the tablet. However, unlike the previous ones, the gadget itself is to blame for everything.

Solution of problems

There are several ways to solve the problem of why there is no Internet on the tablet.

Configuring the Beeper

Note! Very often, users have a problem with obtaining an IP address. In such cases, working on the Web is impossible.

You can solve the problem in this way:

  • You need to change the name of the access point to a new one using only English characters. There is a version that some tablets cannot connect to access points with names in Cyrillic.
  • Reboot the router.
  • Change the encryption method in the settings and save it.

Preparation

In the course of setting up a connection to networks in tablets, all the necessary data is obtained automatically. If this does not happen, then often you need to enter everything yourself. This requires:

  1. Entering the network password.
  2. Check the box next to the "Advanced" item.
  3. Click on DHCP.
  4. In the tab that opens, select "Custom".
  5. When the "Custom" tab opens, you need to enter the following data: IP address - 192.168.1.7 or 192.168.0.7; gateway - 192.168.1.1; network prefix length - 24. Then DNS1 - 77.88.8.8, DNS2 - 77.88.8.1.
  6. Select "Connect".

Network IP addresses

When all the necessary actions have been completed, the user is required to delete the previous network parameters. This must be set in the router settings by going to a special tab called WAN.

Subsequently, the router will get a network connection. Next, on the tablet or other device, you need to specify the available connection options and specify the DNS and IP address. This procedure is done in the "Local Area Connection" tab.

Note! This setup is feasible if the computer has a wired connection to the router.

After all the settings, the devices will have access to the Internet.

Root rights and system update

It often happens that the tablet and router are functioning normally, but there is no connection to the Network. This may be due to the fact that the user does not have the right to tamper with the system. To get the appropriate root-rights, which will allow you to make changes to the settings, you need to download a special application, then launch it and select the "Root device" tab.

In addition, the reason for access problems may be the need to update operating system... This can be done as follows:

  1. "Settings";
  2. "About the system";
  3. "System update".

Note! Quite often, updating the system solves all the difficulties with connecting to the Network.

SIM card replacement

When the Internet works worse on a tablet than on a phone, and both are connected to the Internet from a SIM card, then the problem may be a malfunction of the card itself. In this case, it must be replaced in service center operator mobile communications... If there are no improvements, then it is worth checking the settings of both gadgets.

Stationary computers are fading into oblivion. They were replaced by more convenient and portable things called tablets. The development of modern technical thought already now allows them to be created in formal terms, which are in no way inferior to ordinary PCs.

Devices of the new generation are multifunctional, "hardy", maximally portable and equipped with a keyboard. They allow you to use the endless information capabilities of the Internet at any time and place, but for this, regardless of the chosen model, you will have to establish access to the Internet.

Why connect your tablet to the Internet

Laptop PCs are multifunctional and convenient, but not without the disadvantages of conventional technology. Laptop computers need to be set up to connect to the World Wide Web. The only exception to the rule is the more expensive models with built-in 4 and 3G modems.

But even such an alignment does not exempt from carrying out elementary adjustments.

Owners of budget models cannot count on distribution at any point where there is a reception cellular operator... But, in fact, the tablet cannot function normally without the Internet. The well-coordinated work of all applications depends on it. That is why you need to know the basic ways to connect a gadget via a WIFI interface.

Wi-Fi setup

Almost all modern tablets allow you to connect to the Internet via a wifi hotspot.

There are two main ways to configure:

  • automatic;
  • in manual mode.

For a home connection, the router mode is best suited (when the modem distributes the Internet to all devices). Bridge connections are more limited.

Automatic

In order for the device to configure the connection in automatic mode, it is necessary to carry out a number of the following actions:


After completing all the necessary actions, you need to close all the tabs and check the performance of the specified parameters. Sometimes there are problems that require manual intervention.

It should be noted that the speed of the Wi-Fi connection is much higher than that of the built-in 3 and 4G modules.

Manual

Some laptop PCs require manual wireless settings. This can happen if DHCP is not enabled on the router.

It is best to do this according to the following algorithm:

  • go to the "Settings" menu, then "Wi-Fi";
  • select the item "Manual attachment";
  • enter the network name and stop at the "Advanced" item;
  • select "Custom" IP settings;
  • after the input fields appear, you must register the IP and DNS addresses using the data from the router's subnet (otherwise, the addresses can be obtained from the web service provider).

    • After that, you need to select the type of security and click on the "Connect" button. It should be noted that DNS addresses 1 and 2 have a standard form like "8.8.8.8" and "8.8.4.4".

    Connection methods

    There are four main options for connecting your portable tablet to high-speed wireless internet:

    • via a Wi-Fi router (after purchasing, setting up and installing the router, there should be no connection problems, but in this case we are talking only about the territory limited by your home);
    • via a laptop (convenient if there are several computer devices in the house);
    • using a 3G modem (if it is not built into the gadget, you can always buy it separately);
    • when using hotspots and city access points from different operators.

      • Connecting with a laptop is quite simple and convenient. Almost every modern laptop has a built-in wifi interface. The powerful functionality of Windows 7 and 8 allows you to make a router out of any laptop, regardless of whether it was originally created with a wired or wireless connection.

      As for the 3g modem, when purchasing it, first of all, you need to pay attention to compatibility with an existing portable device. In addition, you will also have to buy an OTG cable. It will serve as a link between the gadget connector and the modem. it good decision for devices running on Android OS, but this method is not suitable for iPads.

      People who often visit shopping malls, cafes and restaurants can use the "advertising" Internet. The owners of some establishments have made web access free, while others use it as motivation for customers (that is, it becomes free when ordering or buying goods for a certain amount of money).

      This method is good for simple surfing the endless expanses of the web. But for a permanent job, it is in no way suitable.

      We connect via laptop

      To connect portable device to the Internet using a laptop, you need to turn it into a distribution module. The new Windows OS series allow you to do this with natively built-in tools. The main requirements are the presence of a wireless adapter or card that supports wi-fi.

      The setup algorithm is as follows:


      After carrying out all these steps, questions about how to connect the tablet to the Internet via a laptop via wifi should not arise.

      3G modem

      If you want to make not only a laptop PC, but also a similar Internet, you need to buy either models with a built-in 3g modem, or it separately. The modem device must be compatible with the tablet.

      You will also need a special OTG cable, but after that, debugging will be as simple as possible:

      • connect the modem and wait for the device to be detected;
      • alternately go to the "Settings ..." and "Data transmission" tabs;
      • we move the virtual lever "Mobile traffic" to the "ON" position;
      • then follow the path of the tabs "More", " Mobile network", "Access point";
      • add a new point, having previously learned its parameters from the provider.

      After the 3g icon appears, the Network can be considered available for use.

      Wireless network via computer

      If you fail to issue distribution of wifi on a laptop using the operating system, this can be done using special installation programs.

      A good acquisition in this regard will be:

      • Connectify;
      • MyPublicWiFi;
      • mHotSpot.

      They have their own differences, but debugging is carried out in almost the same way:

      Video: Internet for Tablet

      Connecting the tablet to the Internet via a WiFi router

      A portable PC can be easily connected directly via a wi-fi router. To do this, we check the activity of the wireless network. It is advisable that the DHCP server be enabled in the LAN interface section, because this will save you from constantly writing work addresses manually.

      If everything works, you can proceed to direct commissioning:

      • in a special tab we find the required connection module;
      • in the wireless networks window, move the slider to the "ON" state;
      • click on the section wi-fi connection and wait for the list of available networks to appear;
      • select the one distributed by your router; if it is protected, an authorization window will appear, in which you need to set the network name and password.

      All settings are completed by clicking the "Connect" button.

      Expensive modern tablets are equipped with 3 and 4g modems, which allow you to surf the net without any problems. But this access is not incredibly fast. The simplest wi-fi significantly surpasses it in the quality of data transfer. Its interface is present on almost all modern PCs.

      Installation of this type of connection can be carried out different ways... For home use, it is best to set up a laptop in router mode, and it will itself "distribute" no to other devices. You can connect your tablet and directly to wireless adapter... But the adjustment can be either automatic or requiring manual data entry.

      If you have the desire and funds, you can purchase a portable modem to create mobile connection... But at the same time, we must not forget that this way not suitable for iPads. In any case, immediately after purchasing a tablet PC, you need to configure an access point. With its help, you can learn about the benefits of hotspot Internet in cafes, shopping centers and other establishments that we all love to visit.

Why is a wifi tablet better than a 3G tablet?

I will say right away that I do not accept wifi tablets and 3G tablets for the following reasons:

Tablets with a built-in 3G modem are at least $ 30 more expensive

3G tablet eats battery power, be healthy. Many people get frustrated with tablets for this reason.

A separate SIM card is required for a 3G tablet and again costs! It seems that you want to go online from your phone and from a tablet, not to rearrange it all the time, so you have to have two.

Now how to get around all these problems and calmly access the Internet in any place via wifi.

1. Wi Fi. Absolutely any tablet, even the cheapest, has wifi. In big cities, there are many wifi access points, these are cafes, parks, public places. You can install a router at home. In general, I did not discover anything new at this point, so let's move on

2. Use a smartphone... Surely the person thinking of buying a tablet went online through the phone. Question: why buy when you can connect to the Internet according to the following scheme:

Now all smartphones support this type of communication. On your android smartphone in the section settings-wireless networks-modem mode choose WiFi hotspot set a password. On the phone, a blue icon appears in the upper corner of the screen. Then on the tablet, find the access point created on the phone and you are all on the Internet!

Note: in addition to Wifi, you can choose bluetooth or usb connection. In the case of bluetooth, the tablet needs to be installed special program, of which there are many now in the Play market.

3. Buy a wifi 3G modem from any mobile operator. The scheme of work is the same as in paragraph 2. The difference is that, for example, you work in the basement and you need the Internet, and there is no wired or any other Internet there, the communication of cellular operators is hidden by the walls and here the wifi 3G modem will serve as an intermediate link, set it to 1 -m floor where the connection is normal and use the internet via wifi.

There are also additional benefits that multiple WIFI devices can be connected.

4. Internet access via 3G or 4G USB modem

An external modem can be connected via a special cable. This is the most popular way to connect a wifi tablet to the internet. You must first switch the modem to Modem only mode on the PC.

Disadvantages:

1. The modem dangles on the wire and outwardly will not look very good

2. The cable may go off and the connection may be interrupted, besides, over time, the micro usb connector on the tablet may break

5. The last way to connect. When there is no wifi router in the house, there is no SIM card, but there is wired Internet will help . Again, you need an OTG cable. In this case, your tablet will turn from a mobile device into a stationary one tied to a wire.

Here are probably all the available ways to connect your tablet PC to the Internet!

According to statistics, tablets are most often used for surfing the Internet and for working with applications, so it is useful to know how you can connect your tablet to the Internet. There are many models of tablets on the market, the more modern ones have built-in modems for accessing the Internet, the older ones are equipped with slots for SIM cards, with which you can connect to the worldwide network. There are also models that can only be connected to the internet via a Wi-Fi network.

How to access the internet from a tablet via Wi-Fi

To establish an internet connection from tablet computer via a Wi-Fi network, you must first find out the name of the network to which you want to connect and the password to it. If the network is open, no password is required. Further steps are approximately the same for iOS and Android devices. Let's give first step by step instructions to connect iOS devices to the Internet:

  1. Enter the "Settings" section.

    The Settings button looks the same on all Apple devices

  2. Select the Wi-Fi tab.

    In the settings window, select the line Wi-Fi

  3. Select the name of the network to which you want to connect and enter the password (if necessary), then click "Connect".

    No password required when connecting to public networks

Android tablets connect to the Internet in a similar way. To connect, do the following:

  1. Pull the screen down from the top to access quick settings... In the panel that opens, click the Wi-Fi button.

    The buttons of the activated functions are highlighted in green

  2. After clicking the button, a list of all available Wi-Fi networks... Select the one you want to connect to.

    Select the network to which you want to connect the device

  3. Enter the password to join the selected wireless network.

    Enter the password to access the network

  4. Check Internet access by running the browser installed on the device.

How to connect from a tablet to a 3G or 4G mobile Internet

To connect to mobile internet 3G or 4G, you need to make sure your tablet has a sim card slot. If there is a SIM card slot, insert a card of one of the Russian mobile operators with a paid service of access to the mobile Internet.

Select the type of sim card compatible with your device ("nano" or "micro")

Enabling mobile Internet in the Android system

Standard Android system adapted even for inexperienced users, so all the settings in it are quite simple. Pulling down the screen with your finger, you will see a panel with buttons for quick access to various functions (this panel is often called a "shutter"). On the "curtain" you can find a button to control access to the mobile Internet. Depending on the version of the system, the button may have different names ("Packet data", "Data transfer") or not be named at all. Visually, it looks like two arrows pointing up and down.

Activate the mobile internet function by clicking on the "Mobile data" button

Press the button and it will light up, which means the activation of the modem for receiving mobile internet traffic... Remember that you will only be able to use a 3G or 4G network if the tablet is designed to work with such networks.

On some Android tablets, manufacturers install their own skins, so appearance the working screen may look different for them. One of the most common skins is Samsung's TouchWiz. Its interface differs from the standard Android interface, so we will consider step by step setting up the mobile Internet for such a device. There is a quick connection option, similar to the scheme discussed above, for it, just pull the screen from top to bottom and select the button for connecting to the mobile network. Another connection option looks like this:

  1. Find the button with the gear image and the name "Settings" on the tablet screen and press it.

    To connect the mobile Internet, you need to enter the device settings

  2. Select the "Connection" section and in the menu that opens, click on the "Data usage" line.

    To connect the mobile Internet, select the line "Data usage"

  3. In the window that opens, check the box next to the words "Mobile data".

    Activate the function of using mobile data by checking the corresponding box

  4. Open your browser and check if the internet is working.

Sometimes it may be necessary to make finer adjustments. Most often this happens when you connect to the mobile Internet for the first time with a new SIM card or when you need to restore the reset settings. In this case, you need to proceed according to the following algorithm:

  1. Enter the settings section.
  2. Click the "Wireless networks" tab in the menu (it is possible that the desired tab will be called "Advanced" or "More ...").
  3. Go to the menu item "Mobile networks" (or an item with a similar name, for example, "Mobile network").
  4. Select the line "Access point" (there are also options for the name "Access points" or APN).
  5. Enter new settings (where to get the data for input, will be described below).
  6. Press the touch key with a square on it and select the "Save" action.
  7. Mark the newly created access point with a tick.
  8. Reboot the system.

Enabling mobile Internet in the iOS system

Setting up your tablet in iOS system happens in a similar way. You need to enter the settings section, then select the "Cellular data" line in the menu. In the window that opens, put the toggle switches in the "On" position opposite the "Cellular data" and "Enable LTE" lines. Then click on the line "APN settings" and enter the values ​​received from the cellular operator in the corresponding fields. To check the availability of the Internet, launch the browser installed on the device.

To set up mobile Internet on iPad, you need to enter the connection parameters obtained from the cellular operator

Where can I get the data that must be entered when setting up the mobile Internet

For the data entered in the settings fields, you should contact the telecom operator that provides you with the service. mobile access to the Internet. This information can also be found on the website of the internet provider in your area.

Data for connecting mobile Internet can be obtained from the provider

I have never had to get into the network access settings so deeply. Usually, it is possible to access the Internet even with automatically configured settings. If you still have to seek help from the technical specialists of the provider company, they will provide you with all the necessary instructions for connecting to the mobile Internet. In other words, the support staff will help you find the required data entry fields and tell you what to enter into them.

How to set up Internet access on a tablet via a USB modem

Only owners of Android OS devices can connect to the global network using a USB modem. IOS devices do not support this feature. To use the modem, you will have to purchase the modem itself, as well as an OTG cable to connect the modem to the tablet.

Having connected the modem to the tablet using a cable, you must:

  1. Wait a few minutes for the tablet to recognize the modem.
  2. After that, go to the tablet settings section and in the "Data transfer" section enable the "Mobile traffic" function.
  3. In the same section, go to the word "More" or "Additional" and enter the necessary information in the settings "Mobile network" and "Access point (APN)". As mentioned above, this information can be obtained from your Internet service provider.
  4. Launch a browser and check the availability of the Internet.

Video: how to connect a tablet to the Internet via a USB modem

How to connect a tablet to the Internet via a smartphone

To connect your tablet to the Internet using your smartphone as a wired modem or wireless router, you need to enable the modem mode on your smartphone. For devices based on Android OS, various modes of operation of a smartphone as an Internet access point are available: USB modem, bluetooth modem, Wi-Fi access point. IOS smartphones can only provide wireless access to their owners.

Setting up tethering on Android devices

To activate the modem function on an Android smartphone, follow these steps:

  1. Select the section "Wireless networks" in the phone settings menu, and in it - the line "More ...".

    On the wireless settings screen, select "Tethering"

  2. On the screen that opens, set the desired mode. The smartphone can serve as a USB modem, a Wi-Fi access point, or used as a bluetooth modem.

    Select the appropriate modem mode

Internet speed tests using a smartphone as a modem have shown that the best result is given by the "Wi-Fi access point" mode.

Activating tethering on iOS devices

To activate the modem mode on iPhone smartphones it is necessary to enter the device settings, select the line "Modem mode" and in the window that opens, set the toggle switch opposite the words "Modem mode" to the "On" position. The page will display the name of the network and the password to access it. This data can be used to connect the tablet to the Internet, which is distributed via a smartphone.

In modem mode, the smartphone independently generates a password for accessing the Internet, which will need to be entered when logging into the network from a tablet

After activating the modem mode on the smartphone, you need to connect the tablet to it. The steps for connecting the tablet to a wireless network and to a USB tethering are described above.

The author advises to remember that the names of the menu items and the location of these items may vary depending on the version used on the device. software... But, despite this, the author always managed to perform the correct sequence of actions when setting up Internet access from mobile devices, guided by the available instructions and just common sense and logic. As a last resort, you can read the documentation for a specific device or ask for help from friends, colleagues or relatives.

Video: how to connect a tablet to the Internet via a phone

Internet connection on modern mobile devices can be done different ways... All of them are quite simple, you just need to read the instructions first. But if in the process of connecting to the network you have difficulties, then do not hesitate to seek help from the younger generation, from colleagues at work or from the service specialists of the Internet provider.