MS Office has become the most used, convenient editor for typing and processing text. In certain cases, the document needs additional external design, requires the addition of stamps, frames. This procedure may differ for different versions of the office. Here's how to add a border in Word 2010.

How to make a frame in Word 2010 around the page

Microsoft's Word program has several editions, many changes have been made to the interface and menu. There is a ready-made design in the software for framing greeting cards. There will be opportunities for the preparation and writing of thesis, term papers (according to GOST), just to improve the visual perception of the text. The creation of markup on a document page can be done in several ways. Below is an instruction on how to make a frame in Word 2010:

  1. Go to the "Home" tab.
  2. In the "Paragraph" section, find the dotted square icon with a filled bottom border, click on the arrow next to it.
  3. Click on the line "Borders and Fill" (located at the bottom).
  4. A window for creating a frame will open, you can set the thickness, color (white will not be visible), style.
  5. After assigning all the settings, click on "OK".

How to make a frame in Word for a diploma

The procedure - how to make a frame in Word 2010 - is of interest to all students who defend coursework and diplomas. The boundaries must be set strictly in accordance with GOST, otherwise the work will not be accepted. At the first stage, it is necessary to create sections for the document, for example, the main part, table of contents, title page. This is necessary so that the border is displayed only for the required areas. To create sections, you need to go to the "Page Layout" item, click "Breaks / Next Page" in the necessary places. Instructions on how to make a frame in Word 2010 correctly:

  1. According to GOST standards, the design should have the following indents: 20x5x5x5 mm. To make settings, go to the "Page Layout" section.
  2. Click on Fields / Custom Fields.
  3. A window for entering parameters will appear. Set the following values: top - 1.4 cm, left - 2.9, bottom - 0.6, right - 1.3 cm. Binding - left, orientation - strictly portrait.
  4. From the menu, select Page Layout, click Page Borders.
  5. Select the line "Frame", immediately confirm "Apply to this section", then click "Options".
  6. In the settings window, set the following parameters: top - 25 pt, bottom - 3 pt, left - 21 pt, right - 20 pt, in the parameters - "always ahead".
  7. Click "OK", the border will appear for the section you selected.

How to make a frame around text in Word

In certain cases, you should know how to insert text into a frame in the Word, and not around the entire page. This is an additional design technique that can help improve the perception of information. The program provides the ability to frame only part of the text to emphasize its importance. This can be done as follows:

  1. Select the area to be decorated.
  2. Go to the main menu tab "Paragraph" on the item "Borders and Fill".
  3. Click "Border", here you can enter all the necessary parameters for the future framing.
  4. In the line "Apply to" you need to set "Text". If desired, here you can assign a "paragraph" and create a border for the whole piece of the document.

How to make a beautiful frame in Word

Framing can be applied not only to official documents, but also to greeting cards. If you have come up with a beautiful toast or poem for a birthday person, you can arrange it as a postcard and give it away. Instructions on how to insert a frame in Word 2010:

  1. Select the "Insert" section.
  2. In the Illustrations group, find the Shapes button. When pressed, options for possible frames will be displayed.
  3. Select the appropriate one, apply it with the mouse on the desired area of ​​the document.
  4. You need to insert the design on a blank document; it is impossible to do this on already written text.
  5. Right-click on the shape, click on "Add Text", enter the required content inside.

How to draw a frame in Word

In addition to the standard tools, there are options for how to make a table frame in Word 2010. You yourself will draw the borders of the design as you see fit. The creation algorithm is as follows:

  1. On the main tab of the menu from the "Paragraph" group, select "Draw Table" (the button with a dotted square).
  2. Set the necessary indents to the right and left.
  3. The cursor changes to a pencil. Place it in the desired place, while holding down the left mouse button, stretch the rectangle to the required size.
  4. The result will be a design, which is essentially one large cell of the table.

Since this is a table, all Word commands will apply to the content. You can easily change the size of the frame or the thickness of the lines, move its borders. You can move a cell horizontally or vertically. The contextual sections "Layout", "Constructor" will remain available for you, which provide the ability to adjust the position of the text, fill.

How to make a frame with a stamp in Word

For diploma or official documents, you need not only insert a frame in Word 2010, but also design a place for a stamp. The creation of a frame is described above, below will be instructions for creating a typical title block:

  1. First you need to insert a footer. To do this, find the bottom of the page, double-click on it, the editor will open.
  2. Go to the "Design" tab from the "Position" group. Change the value to 0.
  3. Create a table with 9 columns, 8 rows through "Insert" -> "Table".
  4. Hold down the left mouse button, move the left border of the table to the edge.
  5. Select all the cells, go to the "Layout" tab, select "Cell Size", set the height to 0.5 cm.
  6. Specify the following widths for the columns in turn: 0.7-1-2.3-1.5-1-6.77-1.5-1.5-2.
  7. Combine cells as needed to create space for stamp, signature, etc.

Video: how to create a frame in Word

Found a mistake in the text? Select it, press Ctrl + Enter and we'll fix it!

The standard gray and unremarkable look of the table in Microsoft Word will not suit every user, and this is not surprising. Fortunately, the developers of the world's best text editor understood this from the beginning. Most likely, this is why Word has a large set of tools for changing tables, tools for changing colors are also among them.

Looking ahead, let's say that in Word you can change not only the color of the table borders, but also their thickness and appearance. All this can be done in one window, which we will discuss below.

1. Select the table whose color you want to change. To do this, click on the small plus sign in the square located in its upper left corner.

2. Call the context menu on the selected table (right-click) and press the button "Borders", in the drop-down menu of which you need to select the parameter Borders and Fills.

Note: In earlier versions of Word, the item Borders and Fills is contained directly in the context menu.

3. In the window that opens, in the tab "The border", in the first section "A type" select item "Grid".

4. In the next section "A type" set the appropriate border line type, color and width.

5. Make sure that the section "Apply to" selected "Table" and press "OK".

6. The color of the table borders will be changed according to the parameters you selected.

If, as in our example, only the table frame has completely changed, and its inner borders, although they changed color, did not change the style and thickness, you must turn on the display of all borders.

1. Select the table.

2. Press the button "Borders" located on the Quick Access Toolbar (tab "The main", tool group "Paragraph"), and select "All borders".

Note: The same can be done through the context menu called on the selected table. To do this, press the button "Borders" and select the item in its menu "All borders".

3. Now all borders of the table will be made in the same style.

Using Template Styles to Change the Color of a Table

You can also change the color of the table using the built-in styles. However, it should be understood that most of them change not only the color of the borders, but the entire appearance of the table.

Often, creating a frame in the Word text editor is not a whim, but a necessity, since many educational institutions require that the title pages of diploma and term papers be drawn up in this way. Announcements, flyers, commercial offers - the frame is a popular and convenient tool that allows you to focus on the text. Let's discuss simple ways to make it in Word.

All pages

If you plan to make a frame in the Word for all pages, then the very first step is to launch a text editor. If the program is not installed on the computer, then you can. As a rule, most users use a table to insert a frame, stretching it to the entire page and placing text there. Of course, this method has the right to exist, but it is fraught with a number of inconveniences - the frame easily slides to the next page when editing. And in general, the option is quite artisanal, since it is not clear what to do, if necessary, to put information in a tabular form in a frame.

That is why it is better to use specially designed tools. Let's consider a step-by-step algorithm on how to make a frame in Word quickly and easily:

  • Open Word, type in the required text. Then go to the "Design" tab in the upper horizontal menu and look for the "Page Borders" icon. We click on it.
  • In the window that opens, click on the "Page" tab and start making settings. On the left in the "Type" menu, select "Frame". In the central part of the window, you can customize the appearance of the frame by specifying the line thickness, color and type. On the right side, a sample is shown - how your document will look, framed with the selected parameters. When they are checked, click "OK".

  • We look at the resulting result.

  • If the result does not suit you, then you can cancel the action and try to adjust the appearance of the frame a second time. The text editor allows you to make frames even in the form of pictures. To do this, in the "Borders and Fill" window, pay attention to the "Picture" line in the central lower part. By clicking on the checkmark, in the drop-down list you will see a lot of pictures from which frames are made. We choose the right one.

  • Done! Nice and creative frame added.

Advice: if you require, then the tabular method will be optimal, since it will allow you to complete the task quickly and easily enough.

Around text

Adding a border around the text is as easy as. The instruction looks like this:

  • Select the text to be framed. In the "Design" tab, click on the "Page Borders" icon.

  • In the "Borders and Fill" window that opens, go to the "Border" tab. In the "Type" click on the "Frame" and customize the appearance of the line by setting three parameters - width, color and type.

  • In the lower right corner we find the offer "Apply to ...". Here you just want to select "text", but in this case, each line of your text will be enclosed in a frame. If this is not required, then we stop at the "paragraph". Click "Ok".

  • A frame is inserted around the selected text.

On a note: if necessary, refer to the "Insert" tab by selecting the "Diagram" icon there. You can also insert a graph into Word, having previously created it in Excel.

Around a paragraph

The sequence of actions is similar to that discussed above, but for clarity, we will analyze it in detail:

  • We put the cursor anywhere in the paragraph, around which you want to make a frame. You can also just highlight it. In the "Design" menu, select "Page Borders".

  • Click on the "Border" tab at the top of the window and click on "Frame" in the border type. We adjust the appearance of the frame and click "Apply to ... paragraph". Then "Ok".

  • We look at the result. The paragraph marked with the cursor or selected will be surrounded by a frame.

On a note: if you need, you should go to the "Page Layout" tab in the menu and find the "Orientation" icon there. By clicking on it, you can choose portrait or landscape page orientation.

A quick way to make a border around text

There are several ways to do the same in the Word text editor. It is easy to insert a frame around the text, if you do not need any special frills, in a couple of seconds. Let's consider a quick option:

  • Select the text that should be framed. In the menu, find the "Home" tab and click on the "Borders" tool (it is a table with dashed borders).

  • In the list that opens, select the type of borders. If you need a frame, then this is "Outside Borders".

  • A regular frame will appear around the text in the same second. Its appearance is easy to edit. Click on "Borders" again and stop at "Borders and Fill" in the list.

  • A familiar window will open where you can customize the look of the frame. Click "Ok".

  • The frame is ready!

Advice: sometimes in Word it is necessary to insert a frame in the form of a drawing stamp. Then you will need to set the page parameters first, and then insert the table into the footer area.

Summing up

A frame in a text editor Word is quick and easy to make - you need to use the "Borders and Fill" tool. The user can not limit his imagination to a simple black line, but customize the frame parameters by choosing a color, shape and width. In Word, it's easy to insert a frame around text or a paragraph, or on the entire page.

Good day, dear readers of the site!

The time has come when the ability to work with Microsoft Office, and in particular in word, became as necessary as reading and writing. Let's consider one of the many questions about working with this wonderful program and learn how to make a frame in word that will make the text more beautiful.

This article will work in Microsoft Office 2013.

How to make a beautiful frame in Word

First of all, open the Word 2013 document with the text in which you need to make the appropriate changes. Go to the tab Design.

After that, in the upper right corner, click on the icon Page borders... A window opens Borders and shading... There are a lot of settings here, at first let's make everything simple - we will learn how to make a frame for the entire text of the page.

Choosing a type Frame, then set Apply to entire document (if we want to apply to the entire document) and click OK.

Now let's start perverting and making a more beautiful version (especially since there are a lot of settings - choose the taste and color).

Now we will improve. Let's add a colored outline to the paragraph. We do everything in the same way: open the document, go to the bookmark Design... We put cursor to the paragraph that we want to style... In the window that opens, go to the tab The border.

Notice the bottom-right corner, which shows that any changes will apply to the paragraph. On this tab you can select.

  • no - there will be no frame;
  • frame;
  • shadow;
  • volumetric;
  • another.

Please note that all changes are immediately visible on the diagram on the right. We choose Frame... Select the type (click on the corresponding icon)

Choosing a color. To do this, in the section Color, click on the small triangle. In the menu that opens, click with the mouse and select the color we need (for example, red).

In chapter Width choose the size in points. To do this, in the section Width click on the corresponding item. We look at the changes on the right. if everything suits us, then press the button OK.

That's all, where the cursor was, there was a beautiful paragraph outline.

And what is needed in order to do all this not in one paragraph, but in several? To do this, select the text we need.

Back on the tab Design click the icon Page borders. Go to the tab The border and press type Frame.

Choose a color and width and press the button ABOUT TO.

All these actions can be seen in the video.

The design of text documents is a task that requires special attention. Every PC user is familiar with the basic options of "Word", but what if you need non-standard text formatting? For example, draw a border or mark the borders of the document? Not everyone is familiar with these operations. We will try to figure out how to make a frame in Word. What does that require? What tips will help us?

Word 2003 and borders

The bulk of users are still working in the 2003 Word. This assembly of the utility has a discreet and familiar interface.

How to make a frame in Word 2003? Let's start by drawing the borders of the page. In order to cope with the task, you need:

  1. Go to the "Format" menu item.
  2. Select the borders to be drawn.
  3. Specify other formatting options. For example, line thickness and type.

Once you are done adjusting the borders, click the "OK" button. Processing of the request will start and the text document will be changed according to the set parameters.

Important: borders are drawn taking into account headers and footers. They can be seen in the "Ruler" of the application.

Ready frames

Where are the frames for the text in the "Word"? The point is that sometimes ordinary lines - borders for formatting a document - are not enough. In this case, you have to look for special frames.

By default, they are in all Word applications. In the case of MS Word 2003, the user will need to adhere to the following algorithm of actions:

  1. Open the required electronic file.
  2. Go to the "Format" menu item.
  3. Click with the mouse cursor on the words "Borders and Fill".
  4. Expand Page tab.
  5. In the "Picture" section, select a frame.
  6. Mark in the "Sample" field the borders along which the picture will be located.
  7. Specify the required frame parameters.
  8. Implement the acceptance of the adjustments.

Finding frame templates in the "Word" is not difficult. Usually they are sufficient for editing text documents. Fast, simple and very convenient.

New versions of the program

The techniques discussed earlier are only suitable for older versions of text editors. But what if the user works in MS Word 2007 or 2010 release?

In this case, the previously suggested instructions will be slightly modified. Thinking about how to make a frame in Word, the user has to adhere to the following algorithm of actions:

  1. Go to the "Page layout" block. It can be found near the "Insertion".
  2. Click on the line labeled Page Setup.
  3. Repeat one of the previously suggested instructions.

In the course of the actions taken, the user will be able to draw the borders of a text document or create a beautiful or original frame. No third party applications or obscure operations are required.

Latest software

The Word-2016 version is slightly different from the 2007-2010 text editor assemblies. And this is a lot of hassle. Users have to quickly get used to the new design and toolbar of the utility.

How to make a frame in Word 2016? In general, the user will need to adhere to the previously indicated principles. The window for editing frames and borders is the same in all versions of the editor, only you can find it in different ways.

In our case, to draw borders and frames in Word-2016, you will need:

  1. Look at the "Design" menu item.
  2. In the right part of the drop-down list of commands and tools, find and click on the inscription "Page Borders".
  3. Carry out setting the parameters of the frame or borders in a text editor.
  4. Click Ok.

It is done. Now it is clear to you how the borders and frames are drawn in the "Word" in this or that case. All described manipulations work flawlessly. The most difficult thing is the choice of frame design, because everyone has their own tastes and preferences.