Tired of the variety of remote controls and the eternal lack of batteries in the country. I decided to buy one universal, a cursory search on Aliexpress led to this option. Price arranged. We must take.
Waited a couple of weeks, came packaged in a transparent box. In the box there is a remote control and instructions on how to program. Also, not a small list of already clogged codes from different remotes. I forgot to take a picture, but everything was left in the country. Photographed only the remote itself
You can sign what from what, so as not to forget
The remote is powered by two AA batteries, which makes it pleasantly weighty in the hand. I don't like light remotes.
There are actually three options for preparing for work:
1 - enter the code from your remote control by looking at the manufacturer's instructions, there may be several codes from one manufacturer. It is necessary to sort out if you are not lucky the first time. My TV manufacturer DEXPP was not on the list and I went the other way.
2 - enable enumeration mode. If something starts to happen on the TV or other device, then press any button on the remote control to stop the enumeration and remember the code. I tried this option, a menu appeared on the TV that cannot be called from a conventional remote control. Apparently the firmware in the TV is from something else.
In the end, this method didn't work either.
3 - program specifically each button. Which is what I did. After trying several options, I settled on this one.
The volume in any mode is always the volume of the audio receiver. All my sound goes through it. Play, stop, pause, rewind are always the corresponding buttons of the player, except for the DVD mode. But AV, EPG and arrows, depending on what is selected, the player, audio receiver, satellite receiver or DVD player. The same goes for the channel buttons.
As a result: the remote control is convenient, you can configure 8 devices, 5 was enough for me and the projector is actually on 1 button On. Two devices in reserve. He replaced a bunch of remotes for me, in which the batteries ran out at the most inopportune moment, and in general it became more comfortable and more convenient.
All these remotes lie unnecessarily in a box. 
UPD instruction in pdf in Russian
I plan to buy +42 Add to favorites Liked the review +23 +39As a rule, if the control panel is lost or broken, it is impossible to turn on the air conditioner. It is not always possible to buy a new remote control for a specific model of air conditioner.
Therefore, buying a universal remote remote control is the only way out. With this remote control, you can control any air conditioner. To do this, you need to configure the remote control for your air conditioner model.
The principle of setting up all remotes is the same and consists in entering the desired code into the remote control's memory. As a rule, an instruction is attached to the remote control, in which there is a table of codes for different models of air conditioners. There are two modes for setting up the remote control - this is automatic and manual mode.
You can use the automatic mode if you do not know which air conditioner you have or your air conditioner model is not in the code table. To set up in the auto search mode, you need to take the remote control in your hand and point it at the air conditioner. Find the “SELECT” button on the remote control, press and hold it for 5 seconds, then release.
The remote control will automatically send commands to the air conditioner, and iterate over all available codes. In this case, the codes on the remote control display will flash and change. As soon as the correct code appears, you will hear sound signal from your device and the air conditioner will turn on. At this point, you must press any button on the remote control, the process of scanning codes will be stopped.
Check the operation of the air conditioner with this code. If the commands are not executed correctly or some functions do not work, run the auto search for codes again until you find the code that will make your air conditioner work correctly.
Manual setup takes less time. Find the code in the code table for your air conditioner model, there may be several. Press the "SELECT" button, while the code on the remote control display should blink once. Using the number buttons, enter the code into the remote control memory and press the "ENTER" button, the remote control is programmed.
Check how the air conditioner commands are executed. If the air conditioner does not work correctly, try entering the remaining codes in turn. You can also cycle through the codes using the TEMP+ and TEMP- buttons.
After entering the correct code, the air conditioner control panel is ready for operation. All basic functions will be available to you. From the remote control, it will be possible to select the operating mode of the air conditioner - this is cold, heat, ventilation, auto mode. You can set the desired temperature, adjust the fan speed and choose the direction of air flow.
Remote MASTER KT-9018E .
Remote controller MASTER Q-988E.
Turn on the device you will control. Brand code search is only supported by older TVs, DVD players, VCRs and satellite receivers. It is not supported on stereos, DVRs, and HDTVs (for those devices, use the different method described in this article).
- The brand code can be found in the documentation for the remote control or on this site.
Release both buttons.
Enter the brand code using the numeric keypad on the remote. While entering the code, keep the remote control pointed at the device.
- If the code is entered correctly, the power button will blink once and remain lit.
- If the code is entered incorrectly, the power button will flash four times and then turn off. In this case, repeat the described process. Make sure you are entering the correct brand code and that your device supports it.
Press the power button. Each time you press the power button, the next code (from the list of brand codes) is sent to the device. In this case, the power button will blink. Keep pressing the power button until the device turns off. This means you have found the correct code.
- If you have entered all brand codes from the list, the power button will flash four times and then turn off. In this case, use the other method described in this article.
Press and release the "Stop ■" button. This will save the code in the remote and assign it to the button corresponding to the turned on device (that is, the button that you pressed earlier). If you do not press the "Stop ■" button, the code will not be saved and you will have to start the process again.
Test the operation of the remote control by turning on the appropriate device and operating it with the remote control. If you are unable to control most of the device's features, use the other method described in this article.
Finding Codes Manually
-
Turn on the device you will control (TV, DVD/Bluray player, stereo, etc.). The device must support the use of the remote control.
- The number of functions controlled by the universal remote control depends on the device.
-
Press the button on the remote control that corresponds to the turned on device. For example, if you are programming the remote to control your TV, hold down the TV button. If there is no button on the remote control corresponding to the switched on device, press the “AUX” button.
- After a few moments, the power button will light up. Keep pressing the device button on the remote.
- Keep the remote pointed at the device.
-
Hold down the power button while continuing to hold down the device button on the remote. The power button will turn off. Keep holding both keys down for three seconds. The power button will light up again.
Release both buttons. The power button LED should be on. If this is not the case, repeat the described steps.
Trained remote control MASTER RM-L677 (for 6 devices)
Universal remote for 6 devices. There is a learning function. You can use the built-in remote control base or program from the original.
RM-L677 (6 in 1) - universal learning remote control.
Menu, Teletext and FASTEXT buttons.
Control buttons for all important and basic functions.
Learning function for programming from other remotes.
Easy to use and set up.
Finding the code makes remote programming easier.
Convenient design.
The code is saved when changing batteries, thanks to the built-in memory function.
Very comfortable, high quality remote control case.
6 device buttons are used to program six different devices in the house having remote controls.
TV1 and TV2 button - for attaching two TVs to them (by entering a code or automatic search code (auto-tuning) from the remote control base.
SAT button - for satellite receiver
DVD button - for DVD player
AUX button - for audio devices
All six buttons, regardless of their name, can be programmed on ANY device by learning from the original remote control.
AUTO SEARCH METHOD
Press the button to which you want to bind the device (TV1. TV2 ...) (the indicator will blink once) Press the SET button and without releasing it, press the green ON / OFF button and hold them until the indicator lights up. Release both buttons. The indicator will start flashing. Auto search has started. As soon as the TV turns off, press any button on the remote control in order to fix the found code and exit the auto search mode. When using the remote, first press the button that corresponds to the device you are about to turn on.
LEARNING METHOD FROM ANOTHER CONTROL
Press the SET button and then, without releasing it, the button to which you are going to program the device (for example, VCR) (the indicator should be constantly on) Release both buttons (the indicator is on) enter the code 9980 on the remote control (the number 10 on the remote control corresponds to 0). The indicator starts flashing. The board is ready for learning. Place both remotes close to each other (1-3 cm) so that the infrared diodes face each other. Press the button on the TEACHER remote control (teaching remote control) and hold until the indicator on the STUDENT remote control (learner) lights up constantly. Press the appropriate button on the STUDENT remote control. The indicator starts flashing. And so we transfer all the buttons in turn .. At the end of the training, press any button on the STUDENT and exit the training mode.
As a result of our actions, we get a remote control for six devices, and not a bunch of remote controls ..
Typically, a universal remote control (RC) is a small box with LEDs, circuits, and buttons. It works due to the fact that the infrared sensor on it transmits the desired code to the same sensor in another device. With it, for example, you can adjust the sound volume, switch channels, change the power of a device, and much more. It differs from the usual universal remote control in that several electrical appliances can be recorded simultaneously in its circuit. Today we will look at how to set up a universal TV remote control.
Setting up a universal TV remote
It will be pretty easy to do everything. It may not work the first time, but don't despair.
If you haven't bought it yet, you can buy it in China at a very low price.
The setting includes several ways:
- Press and hold SET (TV) until the red LED is active, then once on POWER, then enter the TV code and the indicator should turn off. If the indicator does not go out, then you must press the MULT button after entering the code.
- Dial desired number and simultaneously hold SET (TV) and POWER.
- Hold SET (TV) until the red LED is active, then press POWER once, point the remote control towards the switched on TV and wait for its reaction. Then to the MULT button.
In the event that the device does not start working, you need to try entering a different number for the existing TV model, or use method 3.
If you don’t want to set up the remote control yourself or it doesn’t work, then you can ask an employee of some electronics store, you just need to know the TV code.
Setting up a universal remote without a code
AT this method you will have to do the setting yourself and without entering the number. To do this, you first need to turn on the TV. Then on the remote control you need to hold down a button called Set for a few seconds or it may still be SETUP (TV) until the red sensor becomes bright. Send your universal device toward the TV and press the green POWER button. The indicator should start blinking, which means the device has begun to select a code for your TV receiver. We are waiting for some kind of reaction to occur on the TV. For example, the sound will turn off, the channel will switch, etc., this reaction depends on the brand of the TV or even on the remote control. After waiting for the reaction, you must immediately press the MUTE button.
Pdf instructions for setting up the Rolsen remote control
Below is the official Rolsen tuning manual: RRC - 200, RRC - 300. It may be suitable for other devices.
After waiting a few seconds, the indicator will turn off and you can use it. If it didn’t work out, then try turning off the sound after turning on the TV and after selecting the channel, and then do the same steps that are described just above. If you did everything correctly and your devices are really working, then the setup should be successful.