Era optical disks slowly fades away and is replaced by external storage media, flash drives. In this regard, users have learned to create bootable Windows flash drives and, as it turns out, this is much more convenient. This article is devoted to the topic of creating a bootable Windows 7 flash drive using the UltraISO program.

In general, there are quite a few programs for creating bootable flash drives, but not everyone can write the image as it follows the rules bootable media. The UltraISO utility does this very well, which is why I discuss it in my article. For example, you can read the article How to create a bootable USB flash drive for Windows 7 using the Rufus program, by the way, it is also a very convenient utility.

The program is paid, but has a trial period, which is enough for us to create a bootable flash drive. You can download it on the website http://ultraiso-ezb.ru/.

After we launch the program, it is advisable to run it as an administrator, because the program may not work correctly.

In the window that opens, click on the tab file, where we select the item open.

Our image files should appear in the window on the right.

Now go to the tab where we click the item burn a hard disk image.

A window will open where in the disk drive drop-down list, select the flash drive on which the Windows 7 installation files will be written , Leave the recording method as USB-HDD+ and press the Record button. To create this kind of drive, it is recommended to use a flash drive with a capacity of at least 4 GB.

A warning window will appear indicating that all information stored on the disk will be deleted, agree and click the button Yes. Before creating a bootable USB flash drive, do not forget to check if the necessary files are there.

The process of creating a bootable Windows 7 flash drive begins. We wait a few minutes.

At the end of the process, a completion message will appear, press the button back and close the program.

ABOUTGive your opinion about this article, and of course, ask your questions if something suddenly goes wrong for you.

Thank you for your attention!

It's no secret that everyone, even the best and reliable program, has some errors. UltraISO is certainly no exception. The program is very useful, but you can often find a variety of errors in it, and the program itself is not always to blame for them; it is often the fault of the user. This time we will look at the “Disk or image is full” error.

UltraISO is one of the most reliable and best programs for working with disks, images, flash drives and virtual drives. It has huge functionality, from burning discs to creating bootable flash drives. But, unfortunately, the program often has errors, and one of them is “Disk/image is full.”

This error in most cases occurs while you are trying to write an image to hard drive(flash drive) or write something on regular disk. There are 2 reasons for this error:

1) The disk or flash drive is full, or more precisely, you are trying to write too much information onto your storage medium large file. For example, when writing files larger than 4 GB to a flash drive with the FAT32 file system, this error appears constantly.

2) The flash drive or disk is damaged.

While the first problem can be 100% solved using one of the methods listed below, the second problem is not always solved.

First reason

As already mentioned, if you are trying to write a file that is larger than there is space on your disk, or if the file system of your flash drive does not support files of this size, then you will not be able to do this.

To do this you need to either split the ISO file into two parts if possible (you just need to create two ISO images with the same files but divided equally). If this is not possible, then simply buy more media.

However, it may be that you have a flash drive, for example, of 16 gigabytes, but you cannot write a 5 gigabyte file to it. In this case, you need to format the flash drive with the NTFS file system.

To do this, click on the flash drive right click mouse, click “Format”.

Now we indicate file system NTFS and click “Format”, then confirm our action by clicking “OK”.

All. We wait for the formatting to finish and then try to record your image again. However, the formatting method is only suitable for flash drives, because the disk cannot be formatted. In the case of a disk, you can buy a second one, where you can record the second part of the image, I think this will not be a problem.

Second reason

Here it is a little more difficult to fix the problem. Firstly, if the problem is with the disk, then it cannot be fixed without purchasing new disk. But if the problem is with the flash drive, then you can full formatting, unchecking the box with "Fast". You don’t even have to change the file system, it’s basically not that important in this case (unless, of course, the file is larger than 4 gigabytes).

That's all we can do about this problem. If the first method does not help you, then most likely the problem is in the flash drive itself or in the disk. If nothing can be done about the drive, then the flash drive can still be fixed by completely formatting it. If this does not help, then the flash drive will have to be replaced.

Windows 7 remains the most popular operating system in the world to this day. Many users, not accepting the new flat design of Windows, which appeared in the eighth version, remain faithful to the old, but still relevant operating system. And if you decide to install Windows 7 on your computer yourself, the first thing you need is bootable media. That is why today the question will be devoted to how to create a bootable USB flash drive with Windows 7.

To create bootable USB media with Windows 7 we will turn to the help of the most popular program for these purposes - UltraISO. This tool boasts rich functionality, allowing you to create and mount images, burn files to disk, copy images from disks, create bootable media and much more. Creating a bootable Windows flash drives 7 using UltraISO will be very simple.

How to create a bootable USB flash drive with Windows 7 in UltraISO?

note that this method Suitable for creating a bootable USB flash drive not only with Windows 7, but also for other versions of this operating system. Those. you can burn any Windows to a USB flash drive using the UltraISO program

1. First of all, if you do not have the UltraISO program, you will need to install it on your computer.

2. Run the UltraISO program and connect the flash drive on which the operating system distribution will be written to the computer.

3. Click the button in the upper left corner "File" and select "Open" . In the explorer that appears, specify the path to the image with the distribution of your operating system.

4. Go to the menu in the program “Boot” – “Burn hard disk image” .

Please note that you will then need to provide administrator access. If your account does not have access to administrator rights, then further actions will not be available to you.

5. Before you begin the recording process, removable media must be formatted, cleared of all previous information. To do this you need to click on the button "Format" .

6. When formatting is complete, you can begin the process of burning the image to a USB drive. To do this, click on the button "Record" .

7. The process of forming a bootable USB drive will begin, which will last for several minutes. Once the recording process is completed, a message will appear on the screen "Recording complete" .

As you can see, the process of creating a bootable USB flash drive in UltraISO is incredibly simple. From this point on, you can proceed directly to the installation of the operating system itself.

To install Windows you need either boot disk with the distribution kit, or a bootable flash drive. Flash drives have been very popular and convenient lately, so it makes more sense to boot from them.

There are many methods and applications for creating bootable USB flash drives. The easiest way to do this is with the Ultraiso program.

It is very functional and at the same time easy to use software tool . For it to function, you must first complete the installation by downloading the program distribution kit, and also prepare an operating system image.

Why make an installation flash drive?

Often, during the operation of the operating system, unforeseen situations occur, as a result of which the operating system either does not load at all or operates with critical failures. It is impossible to completely protect yourself from such situations, so you need to know how to behave.

At best, operating system problems can be fixed through a built-in function Windows recovery, which naturally needs to be launched if this feature is present.

In a situation where this is not possible, you should try to boot through the installation disk or installation flash drive.

An extreme situation that occurs when there is no backup copy operating system and user data, implies its reinstallation. Based on this, you always need to have an OS image. It can be used for a new installation, restoring an old OS, or reinstalling it.

In most situations, the Windows distribution is saved on a DVD. But the likelihood of data loss on a DVD disc is significant due to the fact that it is subject to physical impacts. After all, just one small scratch can render the disk inoperative.

A flash drive does not have this drawback, so it is more advisable to save operating system on it. In this case, the process of installing Windows from a USB drive is similar to the installation process from a DVD. An additional advantage of a flash drive over DVD is its more compact size.

We will need

To create a bootable USB drive, in addition to the data carrier itself, you will need an operating system image and a specialized program with similar functionality. There are many such programs, but we will look at the UltraISO utility, which must first be downloaded and installed on your hard drive.

It is designed specifically for working with ISO images and recording them on storage media; it allows you to make bootable disks and flash drives. The undoubted advantage of the utility in question is its friendly Russian-language interface.

In addition to generating and recording image files, it also allows you to make changes to disk images. Its important feature, which is of great value, is the ability to create bootable media - disks and flash drives. In addition to this, the utility is capable of converting image files to ISO format if the existing OS disk image is saved in a different format.

A certain disadvantage of this utility is that it is paid, but there is a trial period for free use. You can use a version of the UltraISO program free of charge with certain restrictions.

It is important to know that all information from the flash drive must be saved to another safe place, since all data will be destroyed when creating the installation flash drive.

Video: bootable USB flash drive using Ultraiso

If there is no OS image

Situations often occur when the operating system image is missing. The solution to this problem is very trivial. It can be created either using installation disk Windows, or through specialized programs, of which there are a great many, some of them are completely free.

The sequence of actions is as follows:

Create a bootable USB flash drive using UltraISO

Let's look at the sequence of steps to create a bootable Windows 8 USB flash drive from ISO image. Bootable flash drives with previous operating systems are created similarly without any visible differences.

Algorithm:

At the end of these steps, it is recommended to make sure that the Windows OS image is correctly formed on the USB drive. When you open it, the saved Windows 8 image will be displayed. The sequence of actions when creating a Windows 7 OS image is similar and does not contain any significant differences.

It is important to know that to install Windows in the BIOS you need to set the boot order various devices. You need to start attempting to boot from a flash drive.

The need for a bootable USB flash drive arises periodically. The reason for this need may be failures in the operating system itself and interruptions in the operation of the hardware. No one can protect themselves one hundred percent from such problems, but having a pre-created bootable flash drive will help solve the problems that arise without time loss and significant labor costs.

There are several basic ways to make a bootable disk or flash drive.

The main ones:

• using specialized programs such as UltraISO;
• using standard Windows tools via the command line console.

Create bootable USB flash drive Even the most untrained user can easily use Ultraiso, as the program is very clear and convenient.

It's time to figure out exactly how to do this with minimal effort - using the UltraISO program.

This program is one of the most popular utilities for creating bootable media. Well, let's find out exactly how to use it. Especially considering that the trial period of the program fully suits our needs.

How to create an installation flash drive using UltraISO

To get started, you should download the program UltraISO.
This archive with the program has been personally verified by us, and the installation process is shown in the screenshots.

After launch executable file(you should run it as administrator) a window appears in front of us about license agreement. Do you remember to carefully read every line of this legal document? Here we are.


Click next and check the boxes according to the desired effect. In this case, we are only interested in the shortcut on the desktop.

The main window of the UltraISO program opens. It includes conventional three parts. We are interested top menu and points

Choose File, open. The disk image selection window opens.

Our next step will be to select an item Burn a hard disk image in the menu called . After this, a window for selecting recording media appears. If you ran the program as an administrator, there should be no problems. Otherwise, restart UltraISO as an administrator.

Click on the button Write down, and do not forget to agree that the information on the flash drive will be hopelessly lost. This is actually true!

The flash drive will be cleaned and all information will be deleted. And don't say we didn't warn you! And yes, please note in paragraph Recording method should stand USBHDD+

We open our flash drive and make sure that the files were written successfully. If unsuccessful, restart the program as administrator and try again.

Now you can restart the computer and enter the BIOS, and then select our drive and boot. But you should understand that the boot process from a flash drive may be slightly different. It all depends on whether you are using UEFI or Legacy BIOS. And more about this in the next article.

Why should you choose a flash drive?

Even a tiny scratch on an optical disc can render all recorded information unusable. And the reading speed from a flash drive is much higher than an optical disk. And in general, a flash drive is much more compact than a round disk. Based on all of the above, this media is much more convenient than outdated CDs. Certainly, new technology brings new problems, and even now it is quite difficult to launch or install an operating system from microSD cards, for example. But overall, USB flash memory technology is superior to outdated optical disk technology.

I hope this material helped you in realizing your ideas.