If you did it out of curiosity and now want to delete it, there are several solutions: you can do it with a forced update to the latest one, which is especially painful for iPhone 4s and earlier models. On these devices, the latest version of Apple's mobile operating system quickly drains the battery, causes communication problems and is very slow. So today I will tell you how to remove jailbreak without automatic iOS updates.

Is it possible to remove jailbreak?

Until recently, there were no tools that would allow you to remove jailbreak from an iPhone without flashing it. I had to restore the device on my computer via iTunes. If at the time of restoration the version of iOS on your device was different from the current one, flashing was accompanied by automatic update. For owners of the latest iPhone 6 and iPhone 6 Plus (or the future iPhone 6s and iPhone 6s Plus, the presentation of which we expect tomorrow) with a large performance reserve, this is not a problem. Users of the iPhone 4s received a terribly slow iOS device with a firmware update.

Today we have a tool that allows you to remove jailbreak and reset the device to factory settings without flashing it, and all this thanks to the creator of the alternative store Cydia applications Saurik. It's called Cydia Impactor and is available in Cydia in the BigBoss repository completely free.

Preparation

To remove jailbreak from an iPhone without restoring it on your computer:

1. Create via , or ;
2. Connect your device to the Internet (optimally via Wi-Fi);
3. Charge the device at least 20%;
4. Insert SIM card;
5. Make sure that the device is linked to your “ ” function (if enabled);

How to remove jailbreak

In conclusion

As you can see, it is possible to remove jailbreak from an iPhone and it is not at all difficult to do. To restore data you can use

Removing jailbreak from iOS 6 - iOS 10.1.1 is very simple. Need to update or restore iPhone or iPad to new firmware. After which even the service center will not know that the device has been hacked. Well, for those for whom this is not easy, I will try to consider in detail all the methods and answer the question - how to remove jailbreak...

Remove jailbreak iOS 6 - iOS 10.1.1 without a computer

One of the most simple ways remove jailbreak without computer This is to update the firmware over the air via WI-FI.

To do this, go to the application “Settings” → “General” → “Software update” . In case you left new version firmware, you will be prompted to download and install it. If not, you should too latest firmware, or the download fails for some reason, you will have to restore iOS using iTunes.

Remove jailbreak iOS 6 - iOS 10.1.1, via iTunes

To do this, connect your iPhone or iPad to your computer with via USB cord. And, without reservation, do backup copy device, so that in case of unforeseen circumstances, you do not lose all data from the device. Turn off Find My iPhone

Select your device, in my case it’s an iPhone 6s, go to the “Browse” tab and click the button “Restore iPhone…”.

A window will appear warning you that all media files and other data from the device will be erased. Click again "Restore", confirming the program's actions.

The factory reset process will begin. Upon completion, you will need to perform initial setup device, or restore all information from a backup copy. If you want everything on the device to be the same as before the restoration, select the 2nd option. After this jailbreak and its traces will no longer be on the device.

Quite often, jailbreak becomes the problem due to which something either stops working or refuses to function as expected. How can I remove it from my device? At the same time, it is very important not to harm the gadget. In fact, this is not very easy to do, since the device menu does not have such a magic button, by clicking on which everything will be deleted, and the smartphone or tablet will return to standard settings.

Warning

Don't do a normal reset. This will lead to complete inoperability of the device. It will simply freeze on the image of the company logo. Therefore, it is a bad idea to remove the jailbreak by simply resetting it. How to remove it? More on this later.

But first, there's an important reminder: Before you do any of the steps below, be sure to create a backup if you have important data on your device.

Removing jailbreak without using a computer and without restoring the firmware

This method Suitable for users who already have similar experience. If a person has just started using Apple technology, then it is better to skip this part of the article and move on to the next point. Well, if you still want to, then you need to do everything carefully.

This method is good for the following reasons:

• The firmware version will remain the same after jailbreak is removed. The entire process occurs without software recovery.
• The device will not be updated to the latest version software, and the user can easily save the old firmware.
• There is no need to use a PC, since everything happens in the menu of the device itself.

But there are also disadvantages:

• The method works on the eighth iOS versions, but not on later ones.
• The sixth generation cannot be jailbroken.

How to remove it? Let's get started:

1. You need to disable the passcode on your device, as well as the Find My iPhone feature.
2. Login to Cydia.
3. Search for Cydia Impactor and install this program.
4. After installation, open and click on the inscription at the very bottom of the screen. After this, you do not need to take any action, but just wait about 15 minutes.

After the process is complete, the device will reboot on its own and become completely clean. By using this application, jailbreak and other user data will be deleted. The firmware version will remain the same as before the procedure.

If the above method does not work, then you need to restore the firmware.

Jailbreak: how to remove it completely?

The easiest and most reliable option is to use iTunes. You just need to follow a few simple steps:

1. Download, install iTunes. If this is done, then simply update.
2. Connect the gadget to the computer.
3. Click on “Restore” in the upper right corner.
4. Next, the program itself will download and install the latest firmware.

That's it. Now the device is clean, and you can start activating it. This method works on both tethered and untethered jailbreaks. But it happens that recovery does not help, and the device freezes at the logo. What to do?

Actions when frozen

The most radical measures are needed here. It is necessary to return the firmware by entering the gadget into a special one. This is done quite simply, but you should be careful. There is no other way to save the gadget.

It can be seen that there are different approaches to removing jailbreak from devices. There are no completely hopeless situations. The main thing is to do everything right. If you are afraid, you can always turn to specialists who will help solve the problem quickly, but not for free.

In general, it is better to use technology and applications legally, and not resort to pirated methods.

More and more users are thinking about jailbreaking every day, but since this is “pure hacking,” many are afraid to do it. It is worth noting that after jailbreaking, the device receives many new features, arousing interest among users. Jailbreak has both advantages and disadvantages, after reading which you can decide whether it’s worth hacking your gadget.

What is jailbreak

Jailbreak is a procedure for hacking the iOS operating system, allowing the user to obtain unauthorized access To file system Apple devices. A jailbreak is performed by identifying vulnerabilities in the Apple security system, thanks to which the user gains access to previously inaccessible system files. After jailbreak, the owner of a gadget running iOS can manage the contents of the file system and install various programs from third-party application stores, in addition to the main one from Apple ( App Store). Users of a “hacked” iPhone and iPad, as before, have access to all functions of the device, including iTunes and the App Store.

One of the main functions of jailbreak is the ability to modify iOS functions, as well as customizing the iPhone or iPad interface.

Why do you need it for an iPhone or iPad?

By using jailbreak, the user receives another additional Cydia application store, containing those applications that are not available in the App Store or iTunes. Considering that thanks to jailbreak it becomes possible to modify iOS, Cydia contains all those applications that will help customize the operating system to the user’s taste. Also in Cydia huge amount free applications, which are distributed for a fee in the App Store. It is worth noting that everything free programs from Cydia (popularly known as “tweaks”) are just copies of licensed applications, which in most cases are paid.

Advantages

1. Additional Cydia app store. Most Apple users decide to jailbreak just for the sake of Cydia, which provides the ability to download free applications that are distributed on the App Store for a fee.
2. Customize the iOS interface and functionality to your taste. Jailbreak allows you to change appearance and the content of the operating system by downloading specialized applications from Cydia.
3. Hidden Features Apple devices and file system access. Jailbreak will allow users not only to take advantage of hidden possibilities iOS, but also gain access to the file system, which will make it possible to control the operating system and change source codes.

Flaws

1. Possible problems with downloaded applications. Since tweaks from Cydia are not licensed applications, but only copies, problems with the stability of their operation are more common, and their use can lead to the crash of licensed applications that previously worked stably.
2. Different tweaks - different problems. After installing or deleting any tweak downloaded from Cydia, a system cache of the tweak (garbage) remains in the system, which will remain on the device forever, and there have also been cases of incompatibility between tweaks, which is why they do not work.
3. Problems with iOS update. It is impossible to update iOS on a jailbroken device, and when an update is released, the jailbreak always crashes, which is why all downloaded tweaks from Cydia and interface changes are deleted.
4. Deprivation of technical developer support and Apple warranty. If the device needs to be repaired, the user will have to get rid of the jailbreak, and if you need to use the warranty, service center will refuse service.
5. Security of Apple devices with jailbreak. Hacking a gadget will expose it to viruses, which can subsequently lead to the loss of personal data, including information about payment options (bank card details).
6. Battery autonomy has been reduced. operating room iOS system closed for a reason, because the developers Apple optimize the level of load on system hardware in order to balance battery power consumption and maximize battery autonomy.
7. Loss of communication quality. Many users have noticed that jailbreaking can affect the quality of calls during calls. These problems manifest themselves as frequent interruptions in communication, and sometimes even distortion of the subscriber’s voice.

Types of jailbreak

An untethered jailbreak is performed once and works until the next firmware is released. This type of jailbreak is based on vulnerabilities that make it possible to gain access to the file system every time the gadget is booted without any other intervention.

A tethered jailbreak gives the user access to the file system of Apple devices only until the first restart or shutdown of the device. When you reboot a gadget, you often encounter problems with its startup, or the device will start, but some tweaks will stop working or disappear altogether.

Installation instructions

Using a computer

To perform a jailbreak, the user needs to download the free Pangu 9 software. Before starting the hacking process, you must:

• Update iTunes on your computer to the latest version.
• Back up your data via iTunes or iCloud.
• Turn off screen passcode and Touch ID protection (Settings > Touch ID & Passcode).
• Turn off Find My iPhone (Settings > iCloud > Find My iPhone).
• Activate Airplane Mode in Control Center.

How to jailbreak - step by step guide

After the subsequent reboot of the gadget, the jailbreak process will be successfully completed, as indicated by the message “Jailbreak completed”.

Without the help of a computer

1. Open this manual in Safari browser on your iPhone, iPad or iPod touch.
2. Follow the link itms-services://?action=download-manifest&url=https://www.iclarified.com/jailbreak/pangu-pp/jailbreak.plist and click “Install”.
3. Wait for the download and installation of the PP application required to perform the jailbreak.
4. Go to Settings > General > Device Management.
5. Select the developer profile that appears there and in the window that opens, click “Trust.”
6. Launch earlier installed application PP.
7. Agree to receive notifications.
8. Click on the circle located in the center of the screen and lock the device by pressing the "Power" button.
9. Wait until your device reboots, then launch Cydia to check the jailbreak installation.

Do not respond to incoming notifications during jailbreak installation.

After all the steps completed, the jailbreak is installed, and without using a computer or data about account Apple ID.

Key tweaks worth Jailbreaking for

How to delete on iPhone or iPad

Today, there is a special tool with which you can remove jailbreak, while resetting all settings to factory settings and without using any flashing.

Before you begin removing jailbreak, you need to perform a number of actions, namely:

• Create a backup via iTunes, iCloud.
• Connect your device to the Internet (optimally via Wi-Fi).
• Charge the device at least 20%.
• Insert SIM card.
• Make sure that the device is linked to your Apple ID using Find My iPhone (if enabled).

Instructions

• First you need to go to Cydia.
• Go to the BigBoss repository, which is installed by default, and find the Cydia Impactor application.
• Next you need to install Cydia Impactor.
• After successful installation, Cydia Impactor will appear on the desktop of the device and you need to launch it.
• After opening Cydia Impactor, text in English will be displayed on the screen, under which you need to click on the “delete all data and unjailbreak device” button.
• Next, you need to click on the “Delete all” button, after which the jailbreak removal procedure will begin. During removal, under no circumstances should you press anything, but just wait about 10 minutes.
• Once the removal is complete, the device will reboot on its own and will need to be reactivated.

Possible problems and ways to solve them

Problems with jailbreaking are very common, but their solutions are not at all complicated.

Error 0A (stuck at 45%)

This error appears during jailbreak, while the utility freezes at 45-50%. To solve the problem, you need to connect your device to your computer, open iTunes (must be the latest version) and find your gadget in the list. Next, go to “Backups” and uncheck the “Encrypt backup” option. copy of iPhone" After these steps, you need to try jailbreaking again.

Start button gray

If the “Start” button is gray and not clickable, this means that Pangu 9 does not allow you to start jailbreaking your device. To make the “Start” button clickable, you need to disconnect the device from the computer and install latest version iTunes and try again. If the latest version of iTunes is installed, but the “Start” button is still gray, try running iTunes as an administrator or reconnecting to the Internet.

Cydia icon does not appear

It often happens that the jailbreak procedure was successful and without errors, but the Cydia application store did not appear on the device screen. This is explained by the fact that the Pangu utility was not allowed access to “Photos” in time. To solve the problem, you just need to re-hack the device by manually allowing access to the “Photos” application of the Pangu. Having done this, Cydia is guaranteed to appear on the gadget’s screen.

Cydia won't launch

There are cases when the jailbreak was successful, there were no errors, Cydia appeared on the screen, but the attempt to open it ends immediately after clicking on the icon. To solve the problem, you need to reset the device to factory settings, and then update the firmware version (if there is an update). Next, it is recommended to create a backup copy or check its availability if it has already been created and try to launch Cydia again.

The user can decide for himself whether it is worth jailbreaking his device, based on all the advantages and disadvantages of this procedure. There are a huge number of opportunities after jailbreak, which is worth just customizing the device interface to your taste, but is it worth depriving your iPhone or iPad of warranty service for this? - a question that more and more users of gadgets running iOS are asking.

Sometimes, after installing a jailbreak, you need to remove it for various reasons. Let's discuss how to do this.

So, after hacking your favorite iPhone, installing many tweaks, you realized that the gadget has now become unstable. Or you just unexpectedly needed warranty service from an Apple store. In any case, the question came to you - how to remove jailbreak?

Removing jailbreak will help you free up space on your phone, restore its stability and remove hidden elements. The great news is that this process is quite simple and occurs without any problems for the phone. You just need to use a certain algorithm and the phone will become clean. What can be done for this?

Restoring from an iTunes backup

This method guarantees that the device will receive the unjailbroken status, but all other data will be in place. This best solution for those who have a lot of data stored only in their phone.

1. Launch iTunes and connect your device to your PC
2. When the program finds the device, click on it in the side menu
3. Go to the recovery partition and activate the backup feature
4. The program will restore the device, but first make sure that after the process is completed, your data will not be erased from the phone
5. This way you can delete all files related to the jailbreak, but leave other data
6. This is the safest removal method.

Complete data deletion

Often this method is preferable for two reasons:

1. The device does not store a lot of information and therefore, after performing the deletion operation, it is easier to copy it manually or transfer everything from iCloud
2. You need a clean device without any traces of jailbreak
3. In this case, it is recommended to create a backup in iCloud in advance, so that later you can easily return all the information to its place. So what should you do?
4. Of course, first of all, launch iTunes and connect your phone to your PC
5. In the left panel, select Device and Recovery
6. In this case backup need to be turned off
7. After these steps, iTunes will connect to the Apple server and install the latest version of the system. Naturally, you will have to lose all your data, but since you have created a backup copy, then you have nothing to fear

After the operation is completed, your smartphone will be like new again.

In conclusion, I would like to note that an iPhone without jailbreak installed on it works much faster. In other words, everything Apple offers by default works just fine.

Video: How to remove Jailbreak?