Using these small portable scales, you can weigh loads from twenty grams to forty kilograms inclusive. Maximum weight determination accuracy - Portable electronic scale determine the mass of the load with an accuracy of ten grams! These scales will be useful in any household.
Options
- Automatic shutdown of scales after 1 minute of inactivity
- Operating temperature range: 0-30°C
- The LCD monitor is equipped with a blue backlight
- Keep digital pocket scales separate from your cell phone, at a distance of at least 50 cm from it
- If the monitor of electronic scales blinks, replace the batteries.
- Do not overload electronic scales to avoid damage to the mechanism. If there is an overload, the following message will appear on the scale monitor:
Weighing operation
Avoid vibrations that may interfere with accurate weight measurement. Press and wait until 0.00 appears on the scale monitor. Select the weight unit with the button, default is grams. Place the item you are weighing on the hook of the electronic scale. Read the weight readings only when the numbers on the monitor stop - in this case, the weight readings can be considered absolutely accurate! If you use containers, place it on the hook of a pocket electronic scale, after the numbers stop, press the button, after which the weight will be reset to zero and you can weigh the required item. When finished weighing, press the button.
Portable electronic scales Canter Portable electronic scale can weigh items from 20 grams to 40 kilograms inclusive with an accuracy of 10 grams.
DigitalcanterPortable electronic scale
A good housewife always has everything sorted out: both backfill and preparations for the winter. But in order to cook all this deliciously, you need to take the correct proportions of the products. Therefore, there should be scales in the house or, as they are also called, canter. A electronic canter, characterized by increased accuracy, will help you check the weight of products purchased in a store or at the market.
Portableelectronicscale can weigh objects from 20 grams to 40 kilograms inclusive with an accuracy of 10 grams. So as not to spoil digital canter Portableelectronicscale Do not weigh a load heavier than 40 kg. And if this happens, a corresponding message will appear on the device and you should immediately remove the item being weighed.
Manual electronic scales Portableelectronicscale accessible to any user. There are only 3 buttons to control them: Onn, Off and Mode. The first two buttons are used to turn the canter on and off respectively, and the third button allows you to select the weight unit. For example, weight can be measured not only in grams and kilograms, but also in pounds.
Canter portable electronic scalesPortableelectronicscale allow weighing even in the dark, since they are backlit and operate normally at temperatures from 0 to 30 degrees.
Hand-held electronic scales Portableelectronicscale operate on two AAA batteries. To save energy, the scale automatically turns off after one minute of inactivity.
Portableelectronicscale equipped with one more useful function: determination of tare weight. You should first weigh the container, then press the “TARA” button and weigh the selected product.
Specifications portable electronic scales canterPortableelectronicscale:
- Maximum weight: 40 kg
- Weighing accuracy: 10 g
- Operate at temperature: 0-30 degrees
- LCD monitor with backlight
- Power: 2 AAA batteries
Warnings:
- Do not store electronic scales near mobile phone.
- If the message appears on the monitor, the batteries need to be replaced.
- If the message appears on the monitor, it means the scale is overloaded.
Portableelectronicscale 40kg supplied with detailed operating instructions.
Portable Electronic Scale - description:
Using these small portable scales, you can weigh loads from twenty grams to forty kilograms inclusive. Weight determination accuracy is maximum - Portable electronic scale determines the weight of the load with an accuracy of ten grams! These scales will be useful in any household.
Scale calibration:
Turn on the electronic pocket scale with the button
Wait until 0.00 appears on the display of the electronic scale, then press and hold the button until the display shows 0, then release the button. After this, the weight required to calibrate the electronic pocket scale will flash on the monitor. Set the required weight on the scale hook, after the number stops flashing the scales are calibrated.
Calibration of electronic pocket scales should be carried out at room temperature, after at least 30 minutes of keeping the scale at a constant temperature.
Portable Electronic Scale - technical specifications:
Automatic shutdown of scales after 1 minute of inactivity
Operating temperature range: 0-30°C
The LCD monitor is equipped with a blue backlight
Keep your digital pocket scale separate from your cell phone, at least 50 cm away from it.
If the monitor of electronic scales blinks, replace the batteries.
Do not overload electronic scales to avoid damage to the mechanism. If there is an overload, the following message will appear on the scale monitor:
Portable Electronic Scale - delivery set:
Portable Electronic Scale – 1 pc.
Batteries – 2 pcs.
Instructions for use
Please note that for all our regular customers, we are extending the warranty period for all medical equipment from 12 months to 18 months, and for some devices - 24 months. We also provide assistance to our regular customers in post-warranty maintenance and repair of equipment purchased from us!
We reviewed the articles from Chinese electronic scales, but here is a scan of the instructions, below is the text in English; for those who need it, it will be translated into Russian or any other language...
+ Click on the picture to enlarge!
+ Click on the image to enlarge!
Description:
WH-A series portable electronic scales are new products with dual accuracy for initial marketing. The displaying is very clear for it uses big LCD with backlight. They have some unique function with automatically adjusting accuracy based on the goods" weight, tare, auto-zero, multi-unit conversion, air temperature measuring, turn off automatically, etc. They are ideal as a new generation precise weighing tools, especially suitable for family, shopping, outdoor activities" use because of its excellent accuracy, precision, stability, energy saving, convenient for use, delicate shape, light and portable, etc.
Range and Accuracy:
The products are designed with dual accuracy. They can adjust the deviation automatically based on the weight of goods. The detail is as below:
Range of weight: Accuracy 0-10kg: 5g 10-45kg (or 50kg):10g
Electrical Parameters:
Working voltage: 2.4-3.5V (2 AAA batteries)
Working current: backlight on l< 10mA; backlight off l< 5mA.
Current off State: l< 1mA
Operating Temperature: 10-40C
Operation Guide:
Turn on
Hung the scale and keep it vertical, press “ON/OFF” to turn it on, 2 seconds later enter the state of weighing.
Unit conversion
Press “UNIT” to select unit between kg (kilograms) , lb (pounds), Jin (semi-kilogram), oz (ounces) after turn on. (1kg = 2.2lb = 2Jin = 35oz)
Tare/Zero
When you use container to weigh something fragmented, you can put the container on the hook first, press “TARE” to tare, then put the goods in the container after displaying zero weight, you can get the net weight.
Weight value lock
Press “TARE” lasting over 2 seconds, the displaying will convert between “L_ON” and “L_OF” .
“L_ON” indicates the function enabled, the weight value will be locked, and displays the sign “LOCK” or “fl”. When it was locked, press “ON/OFF” again it will be unlocked and you can weigh for the next. “L_OF” indicates the function disabled and will not lock the weight value.
Weighing
Turn on and wait it to auto-zero, then hung the goods on the hook and it will display the weight. Wait the goods on the hook to be still (stop shaking), the weight value will be locked if the weight value lock function is enabled, the screen displays the sign “LOCK” or “ ” . Then you can press “ON/ OFF” to unlock the value and weigh more.The total weight on the hook (including tare) should be not over the range, or not it will display the warning sign “O_Id” .
Air temperature measuring:
Press “UNIT” lasting for 2 seconds, it will show the environment temperature. Deviation: ±2°Cc Press “ON/OFF” to exit the function.
Turn off:
It will turn off by pressing “ON/OFF” when it was unlocked (It can not be turn off on the initiating state). When it was on the state of locking, you can press “ON/OFF” to exit the function first and press it again to turn off. When it was on the state of air temperature measuring, you can operate the same to turn off, too. If the scale received no operation over 120 seconds, it will turn off automatically.
Backlight Function:
received not any operation or the weight on the hook is stable over 5 seconds. Press any key or change the weight on the hook the backlight will light anain.
Caution:
1, Vertical position of the scale required for turn on or working.
2, Please hold the ring or put aids on the ring to weigh. Should not hold the shell to weigh, or not it will cause the deviation exceeded or damage the scale.
3, Avoid any strong shock or vibration during operating.
4, The shell is made by ABS engineering plastics. Please use soft cloth aided water or detergent to wipe for cleaning, do not use corrosive substances to dean like as benzene, nitro solvents, caustic soda solution, etc.
5, When the screen appears the sign “ ” or “LO” which means the batteries are exhausted, please replace the batteries in time. Take out the batteries for avoiding leakage to damage the circuits if the scale will not be used for a long time.
6, Do not disassemble the scale by yourself if the scale had some failure which is not man-made. Please send back our company or agency to repair.
7, When the weight on the hook is over the range, it will display “OJd” indicates overload. You should remove the goods promptly, reduce the weight to weigh it again. Continuous overloading will damage the scale.
Portable Electronic Scale INSTRUCTIONS Maximum Weight: 40Kg, Minimum Weight: 10g Turning on Place the scale in a vertical position without loading press the ON /OFF key, the screen will show (8888) and a sound will be heard wait about 2 seconds until the screen displays ( 0.00 or 0.000), The scale is ready for weighing. Tare/zero setting When weighing bulk cargo, hang the container on the hook press TARE and the screen will show 0.00 or 0.000, the scale is ready to weigh put the cargo in the container, the screen will display the weight of the cargo. Selecting the lock function Press TARE for 2 seconds. L_ON or L_OF will appear on the screen. Press POWER to weigh new loads L_ON activates the locking function, that is, the weight of the unit load will be recorded on the screen L_OF removes the lock function, that is, the weight of the unit load will NOT be recorded on the screen. Weighing When the screen shows (0.00 or 0.000), hang the weight on the hook, the weight of the load will be displayed on the screen. The permissible maximum weight should not exceed the full load + 9d (5kg: D = 5g, 10kg: D = 10g, 20kg: D = 10g, 40kg: D = 20g), If overloaded, O- will appear on the screen Ld and warning sound. The scale calculates the weight automatically. When the weight is determined, a sound is made The sound and the appearance of HOLD or a lock on the screen in L_on mode indicates the end of weighing. Selecting units of measurement Press UNIT to select the unit of measurement between kg, lb , jin ,oz (1kg=2.2lbs=2jin=35oz) Temperature test Press UNIT for 2 seconds. The temperature will appear on the screen. Measurement error ±2С. Shutdown Press ON /OFF key to turn off (without HOLD mode) Press ON /OFF key to clear HOLD icon, and press ON /OFF key again to turn off in HOLD mode Press ON /OFF key to exit temperature mode, press ON /OFF key to exit temperature mode The scale will automatically turn off after 120 seconds without any operation Warning: 1. Vertical position is necessary for power-on or self-diagnosis. 2. To maintain weight accuracy and protect the scale, keep the stationary rings straight or use weighing attachments. Do not hold the plastic housing when weighing. 3. Avoid sudden movements and vibrations during weighing. 4. Use clean water and detergent to clean. Do not use aggressive liquids (gasoline, solvents, caustic soap, etc. ) to clean the scale body, which is made of ABS plastic. 5. When the (battery) sign appears on the screen, it means the batteries are low and need to be replaced. If the scale is not used for a long time, remove the batteries to prevent leakage and damage to the circuits. 6. Do not disassemble the scale if it needs repair. Contact the seller.