Victor Bushilov

I do not understand negative reviews for Shtrikh. For me, a normal device, it works quickly. Checks punches without freezing, does not slow down. It is convenient in itself, you cannot attribute it to scraps, that's for sure.

Narimanov Evgeniy

and we have no complaints about Shtrikh at all. the fact that the manufacturer has an official website already speaks volumes. We have been using Barcode for a long time enough, checks are always regularly issued, there are also no problems with data transfer. At the expense of the support service and claims to it, we always write to the e-mail indicated there - we receive an answer within 24 hours. Well, if something is critical, then you need to contact the TEC. The support service will not resolve the issue promptly, I agree with that.

Basil

For the cash registers produced by the company "SHTRIH-M" there is one good word- "junk". I do not understand at all HOW these "calculators" can exist in the world of tough competition between high-tech companies ... I bought Atol - also, of course, "not space" in terms of performance, but it copes with its function.

Ignat

Igor, you are asking for advice on something worthwhile, but you do not give any introductory information about your business at all. You have an LLC or an individual entrepreneur, what is the flow of clients, in what area do you have business. Say that the problems have not changed, but do not specify with what - with the battery, with the interface? Difficult to advise something in the air.

Elena

Hope, online cash registers for a small store are not the only necessary equipment, sooner or later you may need both a barcode scanner and software for trade automation. Cuttings of models from Shtrikh can pay attention to ELVES-MF, Shtrikh-MPEY-F, Smart terminals Shtrikh-SMARTPOS-F. Each of these models has the ability to connect other equipment that you may need (for example, a scanner). They are convenient in operation, but everyone must make up their own opinion: what is good for one person does not get tired of the other at all.

Igor

The company has been on the market for many years, there are worthy clients in its portfolio, but I have not yet formed an obvious opinion about the manufacturer.
For starters, they have weak batteries. Ours died almost a year later, we had to use a wire. The interface is also not the easiest one. Then we gradually switched to Elwes-mf. The problems have not changed. When you need to reconfigure something, you spend half the day on it.
Can anyone advise what's worthwhile?

Hope

I have a small office supply store. Tell me, which cashier model Shtrikh-M is right for me? How convenient are these cash registers? How clear is the interface? How often do any failures and breakdowns occur? I would like to hear the reviews of those who use the cash registers of this company. Thank you.

Vladimir.

I don't understand the point of creating a website. Let's say I have some kind of problem with Barcode, what can I find there? Isn't it easier to CALL immediately to the Central Service Center and get help remotely? I do not think that the time spent looking for an answer on the site will be less than 5 minutes of a call. Plus, the site is the same additional resources, human, financial, etc. Hike the site simply duplicates the work of CTOs. And yes, the answers on the site are not quick, yesterday I asked the question in the morning, I received the answer at lunchtime.

• Oksana

  I don't really like Shtrih's support service either. I repeatedly wrote my questions to the forum, but remained unanswered. So there is an obvious minus in the piggy bank. Now I use Shtrikh M Smartpos F, on the whole it suits me. But sometimes you want to get additional advice from the manufacturer. And in response - silence.

Igor

I climbed the whole site, but I can't understand what is the difference between the versions of the Shtrikh-M software: Trade enterprise Prof from the Shtrikh-M software: Base trading enterprise and from the Shtrikh-M software Retail trade? It is also interesting to find out on the website how long it takes for the Shtrikhovites to give answers to questions? And I heard about video tutorials. As I understand now, these lessons will be taught on this site. I wonder if they are paid? And what is the fee? What do you need to take the lessons?

• Tatyana

  Igor,
  As stated on the manufacturer's website, the Shtrikh-M configuration: Base Trading Enterprise has the same capabilities as the Prof. version. The difference is that it is designed for one user. Try to see the configuration options for Prof in its description. Perhaps there you will find a more detailed answer to this question.
  How do you like Stroke at work? Are you satisfied or have any disadvantages?

Shtrih-FR-K, modification "stump"

Introduction. There is such a wonderful KKM - Shtrikh-FR-K with an enormous service life. But the KKM has one serious drawback, it has non-standard dimensions, namely, a great length, for which it received the nickname "log". However, among the mechanics of the central heating center, another modification is widespread - "stump". Despite the seeming capital of the alteration, the "stump" is done quite simply and quickly, and after the revision, the scope of application expands significantly.
A task. Get a small size ASPD / NIM with a high level of reliability, low price and Shtrikh protocol.
Implementation.
Locksmith work. The body is sawn in two stages, first the plastic, assembled into a single body together with the lids, then separately the iron. Moreover, the iron is cut in such a way that the plastic of the case is longer than the iron base. In this case, two threaded holes should remain on the iron base, they will come in handy later.

We cut off the iron so that there is a gap of 1, and at the same time there are holes with a thread 2.

In the above photo - a defective modification of the stump, in fact, gap 1 is only 3-4 mm.

The back wall is fastened with two screws.

We fasten the back wall with two bolts, since gluing requires more precise processing and adjustment. After we have screwed on the future back wall, we draw a contour with a pencil and already cut out the desired contour with a drimmel, it turns out poorly, but quickly.

Glue the remnants of the back top cover to the body.

We glue the remnants of the back top cover on superglue, or on dichloroethane - it also grasps plastic well, it's a matter of taste. In any case, there is enough surface for the glue hold.

Assembled version, ready for use.

To fasten the plastic case to the iron base, three factory mounting bolts are enough. We install the second set of rubber feet as close as possible to the rear corners, so it turns out more stable.

Electronics.

This revision point is optional, although the implementation of this point saved me from trips to the point several times. To do it or not is everyone's personal business. The essence of the revision is to block the head and paper sensor of the control printer. Now, even if a competent user decides to fill in the settings from another FM, which has a control printer turned on, this will not lead to a breakdown of the device.

Modified motherboard.

As you can see, all the revision is two wiring, that is, the process itself will not take much time.

• Thermal head opening sensor - pin 8 of the XS2 connector to ground
• Paper sensor - 6 output of the XS2 connector is shorted to ground.

Modification of the XS2 connector for operation without a printer. Pins 6 and 8 are connected to ground.

The actual revision process is complete.
Conclusion. It should be noted against the backdrop of a decline in demand for PM based on the Shtrikh-FR-K, the "stump" modification is still popular, even despite the clumsy refinement. This is most likely due to the low price, Barcode exchange protocol and the incredible reliability of the Citizen printer.

A stub of ASPD A barcode can fit even in the smallest volume of the workplace.

SHTRIKH-M-FR-K is a modern fiscal registrar from a leading manufacturer of the cash register market with functional filling for all-round use: for work in retail trade (from mini shops "at home" to supermarkets), catering establishments, gas stations, hotels, that is for all areas of trade where reliable automation tools and a high level of productivity are required. kt center will help to set up work " SHTRIKH-M-FR-K».

DISTINCTIVE FEATURES OF SHTRIKH-M-FR-K

• High printing performance - up to 150 mm / sec
• Guillotine cutter
• Possibility of fast loading of the receipt tape
• Quick access to printer units and replacement of EKLZ
• Connection to a personal computer via RS232 or USB interfaces
• Thoughtful modern design

The single-station fiscal recorder from the first to the last detail was produced by the team of the company "SHTRIH-M": the device has an elegant and complete external design proposed by the specialists of the company's internal design studio. FR with its sharpened straight lines of the body structure and with smooth curves of the transparent protective cover will become a key element of the operator's workplace and will perfectly fit into both the office interior and the high-tech store.

Reliability for many years

Printing mechanism fiscal registrar Shtrikh m fr k was developed by the company's engineers, taking into account the extensive experience of our technical specialists in this field. The design of the printer's print mechanism was built with a sufficient margin of safety, even for the most severe operating conditions in hypermarkets and supermarkets. The high-quality thermal head of the ROHM company (made in Japan) with a resource of 50 kilometers ensures excellent printing of receipts even at speeds of about 150 mm / s. The durable plastic of the case is resistant to mechanical stress, ensures the durability of the device, and the thoughtful design is simply pleasing to the eye. The auto-cutting unit (made in Taiwan) with a guillotine-type knife allows performing both full and partial operation of cutting a check. Moreover, even the ingress of foreign objects, for example, change coins, into the cut-off block will not provoke its breakdown: the electronics will automatically block the knife.

Ribbon width and receipt format: wide range of consumables available and freedom of choice

Fiscalator SHTRIH-M-FR-K allows you to print not only on a wide 80 mm tape (up to 57 characters fit in a line), forming fairly representative and informative receipts, but also on the more common 57 mm tape, thus providing an opportunity to save on consumables. A wide range of available fonts (multiple kegels, information in italics or bold), built-in check format tables and printing of graphic elements of logos provide the ability to customize the design of checks at your discretion.

Replacing the ribbon without long interruption of printing

In the fiscal registrar SHTRIH-M-FR-K the function of fast loading of the receipt tape is involved: it is only necessary to insert a new one instead of the finished roll and close the protective cover - it takes less than 5 seconds!

Ease of daily and routine maintenance

Originally created as a fiscal registrar, SHTRIH-M-FR-K is extremely easy to maintain. To get to the fiscal memory or replace the EKLZ, you need to unscrew only two screws and remove the protective plastic case. Reliability, short disassembly-assembly time and available units and parts are additional profit for service centers and substantial savings for end users!

The versatility of the fiscal registrar bar m fr k

Fiscal registrar SHTRIKH-M FR-K is multi-interface, that is, it can be connected to a personal computer both via RS232 and via USB. This allows you to free up the currently scarce COM ports for another peripheral device.

One of the inherent advantages of the device is several available mounting options: it can be mounted both horizontally and, to save space at the cash register, be fixed with fixing screws in a vertical position and at the required angle of inclination.

For manual cutting of a check, the fiscal recorder is equipped with a comb.

Compatibility

In SHTRIKH M FR K, as in the entire line of fiscal registrars from the manufacturer "SHTRIKH-M", data exchange with personal computer implemented on the basis of a single protocol and software driver.

KKM barcode m fr k performs the following functions:

• Sale, return of sale, purchase, return of purchase
• Cash sale
• Sale on credit / for bank transfer. settlement (up to three types of payment)
• Multiplying the price by the total quantity of the product
• Calculation of interest-free markup and discount
• Accounting and control of monetary amounts
• Calculation of subtotals
• Controlling the overall totals
• Calculating the total amount of change
• Reversal of cash transactions (partially or completely) in an open receipt
• Calculation of the percentage markup and discounts for the entire check
• Cancellation of a check
• Payment of sums of money from the cash desk, not related to the purchase
• Cash depositing to the cashier
• Allocation of taxes at fixed tax rates
• Repeating the operation of printing the last fiscal receipt

The Center kt company presents almost all well-known brands of barcoding equipment, if you are interested in a product that you did not find on the site, you can contact our managers by phone and they will help you choose a similar product, or recommend a partner where you can purchase it.

Cash register machine frk stroke it is a reliable fiscal registrar. The barcode frk device has excellent functionality and high performance. The registrar bar fr can perform various operations, for example, such as: keeping records and calculations, making sales for cash and on credit, keeping records of containers and packaging. Fiscal registrar bar fr can calculate percentage mark-up and discount. It should be noted that kkm stroke fr able to generate accounting documents. Appliance stroke fr-k prints up to 1000 receipts without changing the ribbon. Let us add that the barcode recorder fr-k possesses sufficient high speed print - 21 lines / sec. Undoubtedly, the fr-k stroke is perfect for the trade sector, for working at gas stations, in hotels and restaurants, as well as in the service sector.

Features of barcode frk:

The reliable and accurate fiscal barcode frk will be your assistant in business for many years. The main functionality of the barcode frk:

• Accounting for monetary amounts;
• Counting of partial totals;
• Calculating the amount of change;
• Counting the grand totals;
• Cash sale;
• Sale on credit;
• Accounting for the price of containers and packaging;
• Repetition of the purchase;
• Calculation of the percentage mark-up and discounts;
• Formation of reporting documents;

Prices: Without FN, with FN for 15 months, With FN for 36 months.
Belt width: 57 mm
Overview:

This model does not support the requirements of the FZ-54 law. To modernize the fiscal registrar, it is not necessary to replace it. For this purpose was created retrofit kit FR Shtrikh-M.

Contents of delivery:

• Fiscal registrar Shtrikh-M PRK
• External power supply
• PS-232 or RS-USB cable
• 1 roll of receipt tape 80mm
• CD with drivers
• passport, operating instructions, tax inspector's instructions, version passport

The package includes driver barcode m frk (download) and instructions for connecting Shtrih m frk to 1s. (download). Also, the developer of the fiscal registrar distributes the cash program "Shtrikh-M: Cashier's Workplace" (download) free of charge. The commercial equipment of this company has proven itself well in the Russian market.

Appearance and convenience

Fiscal registrar Shtrikh M FR K is a cash register designed to be connected to a computer in on-line mode. Another product from the Shtrikh-M company, designed to replace the outdated, but still very popular fiscal registrar Shtrikh FR-K. KKM Shtrikh M FR-K has a more compact body, an updated processor board and an improved algorithm of operation.

Barcode M PRK is perhaps the most popular fiscal registrar in Russia due to the company's long presence in our market and a good technical support... Recently, it began to give up positions due to its high cost in front of new competitors.

Available in three colors: white, gray and black, but the top cover is always black.

Display

The display consists of 2 LEDs:

• red - signals an error
• green - signals that the fiscal recorder is connected to the 220 volt network

Nearby there is a button to feed the receipt tape.

Connecting to devices

Has two ports for connection external devices- one for a computer - LPT port, the other for connecting a cash drawer or a call to the kitchen. Unfortunately, there is no USB port, but the package may include a USB - LPT adapter. There have been cases when the fiscal registrar does not work well through the USB interface, therefore, if possible, the Shtrih-M PRK is connected via a COM port.

You can buy FR Shtrikh-M PRK, the price of which, although a little more expensive than analogues, but the difference pays off due to the reliability of the cash register, and you can order the connection of the fiscal registrar to 1C accounting (or another program) in our online store. Service engineers of our TEC will connect the cash register to a computer and train personnel on how to work with cash register machines. 1C and Shtrikh-M PRK work great together in one of the largest retail chains in Russia.

Printer

Over time, pieces of paper are hammered under the knife of the automatic receipt tape cutter.

Not a reliable cutter of the receipt tape, often jams. You have to scroll the knife roller manually, for this there is a technological hole under the top cover of the printer.

When a paper jam occurs, do not try to pull it out of the paper with foreign objects - you can easily damage the teeth of the metal paper cutter.

Types of basic cash register receipts and reports

Bar M FR K can print logos on cash register receipts.

Food

Impression

Cons of a fiscal registrar

• unreliable knife cut cash register receipts
• weak technical characteristics
• no USB port

Applications

• retail and wholesale

Fiscal registrar / printer settings before connecting to a computer

• download, unpack and install the driver for working with the fiscal registrar
• connect the power supply to the fiscal recorder
• connect the computer communication cable (COM or USB)
• turn on the power switch on the fiscal recorder
• run the "Driver Test" program

Start → All Programs → SHTRIH-M → Driver FR 4.10 → Driver Test FR 4.10

In the running driver, click the button: "property setting"

In the pop-up window, click the "Search for equipment" button

click "Start"

After the driver finds the equipment TWICE CLICK THE MOUSE on the found fiscal recorder Shtrikh-M-FR-K:

Click the "test connection" button, the name and serial number of your registrar will appear, then click the "OK" button.

Driver Installation

• IMPORTANT! When connecting the fiscal registrar to Windows 7, additional drivers are required (you can download them right here) -Drivers for Shtrih-FR-K.
• Please note that for the device to work correctly, you need to install them 2 times!

SHTRIKH M FR K connection to 1C v8.1 / 8.2

Typical configuration "Retail 1.0"

1) Install the SHTRIKH-M driver from the disk that comes with the FR.

2) It is necessary to rewrite from the ... Program Files folder SHTRIKH-M Driver FR 4.10 all files with the * .dll extension to the 1C platform directory (..Program Files1Сv81in)

3) Register the DrvFR.dll file in the system registry using the regsvr32 command "[path to the file] DrvFR.dll" (if, for some reason, registration did not occur automatically in the installation reason).

4) Connect the phased array to the PC.

5) Start 1C: Enterprise.

6) Open the menu "Service" -> "Commercial equipment" -> "Assistant for connecting and configuring commercial equipment".

7) In the form window, select "Fiscal registrars" and click add.

8) In the form of the opened equipment directory, click add again, in a new window select the processing ShtrihMFiscalPrinters_v2.epf, model, write the name, then the button "write" and "ok" select this device.

9) Select the cashier, press the parameters. Select COM port, speed, press "ok".

10) The device is connected, you can get to work :)