Home Applications and software Installing and updating the platform on a large number of computers through a shared network directory. Installing and updating the platform on a large number of computers via a shared network directory Automatic update of the 1s 8.3 configuration according to a schedule

Installing and updating the platform on a large number of computers through a shared network directory. Installing and updating the platform on a large number of computers via a shared network directory Automatic update of the 1s 8.3 configuration according to a schedule

A bad specialist is the one who has to run to all the workplaces and work with his feet. You need to work with your head :)

You can install the platform on each client computer manually.

But then the administrator will have to go through all the computers sequentially.
If there are 2-3 computers, then this is not a problem. But if there are a dozen or more computers, then this process may take a long time.

Updating the platform on client computers will also be a challenge.

To automate this process, you can use the ability to install the platform on large number computers through a shared network directory.

This method can be used when client computers have Windows installed.
The administrator places platform distribution kits and a set of configuration files in a common network directory.
To update the platform, you only need to place the new platform distribution in the common directory.

Mass installation and update of 1C: 9 videos and PDF

We invite you to look at more detailed materials:

Structure general catalog

This video describes how a network directory with platform distributions should be organized so that it can be used for installation on a large number of computers.
It is explained in what form the platform distributions should be uploaded and what configuration files are needed.

Preparing a shared directory on the server

This video discusses in practice how to fill out a network directory with platform distributions. The platform distribution is uploaded and the configuration launch is edited. Shows how to find the launcher for the desired release.

Actions on the client computer

This video discusses the features of installing the platform from a shared network directory on a client computer.

Platform update

This video explains how to correctly place the distribution kit of a new release platform in a common network directory. It describes what actions need to be performed on the client computer for the platform to be updated.

Configuration file defining the location of the shared network directory

This video explains where the network share settings are stored on the client computer, which should be accessed to check for a platform update.

Access rights when installing the platform through a shared network directory

This video explains the most common error that occurs when working with a network shared directory.

Working as a user without administrative rights

This video describes how you can install the platform on a client computer for a user without administrative rights. Attention is drawn to the disadvantages of this method.

Potential security issues when using the AlwaysInstallElevated policy

This video explains why the AlwaysInstallElevated policy is a serious problem for computer security and why you should avoid using it in practice if possible.

And the last day of starting discounts.

This course will cover ALL deployment and support challenges. information systems on 1C.

Here are some topics from the course:

Installing and updating the 1C:Enterprise 8 platform – manual and automatic, for Windows and Linux
Automatic start to perform routine operations
Updating configurations from user mode
Updating non-standard configurations. How to avoid problems when updating modified standard configurations
Create your own delivery cfu files
BSP tools: external forms, processing of filling out documents, etc.
Usage free DBMS PostgreSQL
Installation and launch server cluster 1C:Enterprise 8
Administration Utility for setting up a cluster and worker servers
Settings RLS using the example of UPP 1.3 and ERP 2
What to do if data in information security is corrupted
Settings data exchanges between configurations
Organization group development
Setup and use hardware protection keys
1C software licenses: installation and binding to external equipment

In any case, at some point you will have to deploy 1C, configure reservations, access rights, various launch modes, test the integrity of the databases, ensure the operation of servers, etc.

And it’s better to do it right right away.

So that it doesn't happen later “...! Well what the...! Yours...!” – and other expressions of regret :)

The procedure for updating the 1C database requires certain knowledge and skills in handling a computer, so it is often difficult for the user. Therefore, if possible, it is best.

You can obtain the files necessary for the update in several ways:
— firstly, the latest updates are available on the website users.v8.1c.ru, which you get access to when concluding an agreement for ITS (information technology support);
- secondly, you can update 1C via the Internet, for this you need to have registration data (login and password).

This article describes how to update the configuration when downloading update files, but you can use this article to update the program via the Internet. To do this, you need to skip step 2, and when completing step 4, check box 9 and uncheck box 8, and then enter your login and password.

ATTENTION! If your configuration was modified by 1C programmers, it is not recommended to update it yourself, because this can lead to errors and even data loss.

This article provides instructions for updating 1C:Enterprise 8.3 configurations. So, let's start in order.

1. First of all, create a copy of your database. you can read about . If you have a backup, if something goes wrong, you can always return to the starting point and either start the process again, or use the services of a 1C programmer.

2. Now let's proceed directly to the update. Open the directory with the update, run the setup.exe file and install the update in the default directory.

3. Launch the configurator (steps 1 and 2 in the figure). Select a user with administrative rights (action 3 in the figure).

In the Configurator window, go to the menu Configuration → Support → Update configuration(action 4 in the figure).

If step 4 is not available, you must first open the configuration (step 5) and then repeat step 4.

In the window that opens, select “Search for available updates (recommended)” and click the “Next” button (steps 6, 7).

4. In the window that opens for selecting the type of update source, you must select the checkboxes as in the figure (steps 8 and 9). Click the “Next” button (step 10).

If you update the program via the Internet, then you need to uncheck box 8 and check box 9.

5. After a short pause, a window of available updates opens. Select the configuration version number and click the “Finish” button (steps 11 and 12 in the figure).

6. Next, the program will ask you questions to which you need to answer “Yes,” “Accept,” and “Continue.” When updating the database configuration, a window will appear to accept the changes. You must click the “Accept” button (step 13).

7. After this, all that remains is to start regulated data processing in user mode. To do this, close the configurator and launch the program in “Enterprise” mode (i.e., as usual). The program must be run under a user with administrative rights.

8. When you start the program, you will be asked a question about the legality of the update received, to which we answer by performing steps 14 and 15 as in the figure.

9. If the screen shows information about configuration changes, your configuration has been updated.

Congratulations, you have updated your 1C program!

If you can’t update the 1C database yourself for some reason, then you can leave it and our specialist will do the job!

Updating the 1C:Accounting 8 edition 3.0 program via the Internet

Update of the program 1C:Accounting 8 edition 3.0via the Internet.

The materials of the article are current as of December 5, 2014.

Reproduction of the article is permitted with the author indicated and a link to the source.

1C programs require constant updating. This is especially true for accounting programs, in particular the 1C: Accounting 8 program. The main reasons are the constantly changing legislation on accounting and tax accounting, the development of program capabilities and the correction of identified errors. For example, updates to the 1C: Accounting 8 edition 3.0 program are released almost every month, and sometimes several program updates are released within a month.

This article describes the procedure for updating the 1C: Accounting 8 edition 3.0 program via the Internet in user mode.

Updating the 1C:Accounting 8 edition 3.0 program consists of 2 stages:

Platform update 1C:Enterprise 8.3

For the 1C:Accounting 8 edition 3.0 configuration to work correctly, it is necessary to install platform 8.3 designed for this configuration.

For example, for the configuration of 1C: Accounting 8 edition 3.0. 37 You need to have the 1C:Enterprise 8.3 platform installed, no lower than 8.3.5. 1231 . On a lower release of the platform, configuration 1C: Accounting 8 edition 3.0. 37 will not even open, about which a message will be displayed when starting the program.

Therefore, before updating, let’s check the installed release of the 1C:Enterprise 8.3 platform.

This can be done by opening the Help menu - About the program or through the corresponding “show information about the program” icon (yellow circle with the letter i), located in the system commands area in the upper right corner (Fig. 1).

In the window that appears, we see that the 1C:Enterprise 8.3 platform release 8.3.5.1231 and the 1C:Accounting 8 edition 3.0 platform release 3.0.37.25 are installed (Fig. 2).

It will not be possible to update the 1C:Enterprise 8 platform directly from the 1C program, either in user mode or through the configurator, so you must first download it from the technical support site for 1C:Enterprise 8 programs and install it on your computer.

To download the 1C:Enterprise 8.3 platform, go to the technical support site for 1C:Predariyatie programs www.users.v8.1c.ru, follow the “download update” hyperlink, enter the login and password received when registering the program (if the program has not yet been registered, then go through the registration procedure), in the summary table we find “ Technology platform 8.3" and select latest version platform 1C:Enterprise 8.3 (in this case 8.3.5.1248).

From the list provided possible options platforms 1C:Enterprise 8.3 version 8.3.5.1248, select “Technological platform 1C:Enterprise for Windows (Fig. 3).

If you have downloaded and installed the required version of the 1C:Enterprise 8.3 platform, but when you launch the program in the “About the program” window you still see the old platform, then most likely you downloaded the wrong version of the platform.

The 1C:Enterprise 8.3 technology platform is supplied as a windows.rar archive file, so after downloading this file it needs to be unpacked.

After unpacking, you need to find the file (setup.exe) and run it.

After preparing for installation by Windows Installer, the installation window for the 1C:Enterprise 8 platform will appear. Click the “Next” button (Fig. 4).

In the next window, we are asked to select the components of the 1C:Enterprise 8 platform to be installed and the path where the platform will be installed.

In most cases, we leave everything as is and click “Next” (Fig. 5).

In the next window, click the “Install” button to begin installing the 1C:Enterprise 8.3 platform.

The installation process of the 1C:Enterprise 8.3 platform may take several minutes, and the “User Account Control” window may appear in which you must confirm your desire to install this program to your computer (Fig. 6)

After which the installation process of the 1C:Enterprise 8.3 platform will begin, at the end of which you will be asked to install the 1C:Enterprise 8 program security driver.

This checkbox can be unchecked, since if you are using hardware protection of the 1C program (USB key), then this driver was already installed during the initial installation, but if you use software protection(the connection to the computer was made when installing the 1C program), then this driver is not needed at all (Fig. 7). Click the “Next” button.

(if you do not uncheck this box, then nothing bad will happen, it will just install (reinstall) the 1C program protection driver)

In the last window, click the “Finish” button and the 1C:Enterprise 8.3 platform is installed on your computer.

A week after installing the new 1C:Enterprise 8.3 platform (after making sure that the program is working normally), previous versions of 1C:Enterprise 8.3 can be removed through the Control Panel (to save space on the computer’s hard drive).

Please note that if you are still using configurations that work on the 8.2 platform (for example, 1C: Accounting edition 2.0, 1C: Salary and Personnel Management edition 2.5, 1C: Trade Management edition 10.3, etc.), then the latest version of the platform is 8.2 cannot be deleted. You must have 2 platforms installed (8.2 and 8.3), which will be selected automatically when you run the corresponding configuration.

Run configurations 1C:Accounting 8 edition 2.0, 1C:Salaries and Personnel Management edition 2.5, 1C:Trade Management edition 10.3 on platform 8. 3 , is not recommended, since this configuration is not tested by developers on the 8.3 platform and may not work correctly.

Video lesson "Updating the 1C:Enterprise 8.3 platform:

Updating the configuration of 1C:Accounting 8 edition 3.0 via the Internet

After updating the 1C:Enterprise 8.3 platform, you can proceed to updating the 1C:Accounting 8 edition 3.0 configuration.

We launch the working database in user mode.

If the program 1C: Accounting 8 edition 3.0 is set to automatically check for updates when starting the program, then in the lower left corner we will see a pop-up hint about the availability of a configuration update (Fig. 8)

If we click on this tooltip, we will immediately be taken to the Search and install updates processing (Fig. 13).

To configure automatic check updates 1C:Accounting 8 edition 3.0 when starting the program, go to the menu Administration - Support and Maintenance (Fig. 9)

Here, in the “Program version update” group, select “Setting up program updates via the Internet (Fig. 10).

In the window that appears, select Automatically check for updates “When the program starts”, enter the User Code and Password that we use to log into technical support 1C on the site www.users.v8 and click OK (Fig. 11).

We return to “Support and Maintenance” (Fig. 10).

To install the 1C:Accounting 8 edition 3.0 update, select “Search and install updates” in the “Program version update” group.

A window for choosing how to install the update appears. If the update files for 1C:Accounting 8 edition 3.0 are already installed on the computer, then you can select “Local or network directory” as the source and specify the directory in which the update files are located.

If these files are not yet installed on your computer, then select “ Automatic search updates on the Internet (recommended)" and click the "Next" button (Fig. 12).

The Search and Install Updates window appears, which shows which version of the 1C: Accounting 8 edition 3.0 configuration is available to us (in this case it is version 3.0.37.29), the size of the update file (67.5 MB) and using the “New in version” hyperlink we can see what's new in this version. Click the “Next” button (Fig. 13).

After this, the 1C: Accounting 8 edition 3.0.37.29 update files are received via the Internet. If several updates were skipped that require mandatory sequential installation, then several update files will be received. Information about the number of required and downloaded update files will be displayed in the “Update files are being received” field. (Fig. 14)

The process of obtaining 1C:Accounting 8 edition 3.0 update files may take a long time (from several minutes to several hours, depending on the performance of your computer and the speed of your Internet)

To install updates, the 1C program will ask for a username and password to enter the information database (not to be confused with the username and password for receiving updates via the Internet). You must select a user and specify a password (if one is set), which you specify when logging into the program. This user must have Administrator rights (Fig. 15).

After this, a window will appear in which you can choose how to install the 1C: Accounting 8 edition 3.0 update. You can install the update right now or when you close the program.

If in at the moment If there are other users in the database, you need to ask them to leave this database. This is necessary to create a database backup. Click on the hyperlink “View list active users» you can see which users are currently in this database (Fig. 16).

You can also choose the option of creating a 1C backup. In this case, if an emergency occurs during the update process of 1C: Accounting 8 edition 3.0, the program will automatically roll back to the previous version while saving all data.

I recommend creating backup copies before starting the update by simply copying the folder in which your database is stored through Explorer. But if you make backups regular means 1C program, it is better to first create a “Backups” folder on your computer and specify the path to this folder (Fig. 17)

The process of updating the configuration of 1C: Accounting 8 edition 3.0 is divided into several stages:

Shutting down users

Creating a backup copy of the infobase

Updating the infobase configuration

Allowing new connections

Completion

Information about the progress of the update process can be seen on the splash screen of the 1C: Accounting 8 edition 3.0 program.

After updating the configuration of 1C: Accounting 8 edition 3.0, the program will start in user mode and the update will continue. The progress of the further update process can be seen on the indicator (Fig. 19).

And at the end you will see the information “What’s new in this version”. In which, by following the link to the ITS website, you can read and see an illustrated version of the changes in this version of 1C: Accounting 8 edition 3.0.

To do this, go to the Administration - Support and Maintenance menu and find in the “Program version update” group, select “Update results and additional data processing” (Fig. 20)

All additional data processing procedures must be completed successfully (Fig. 21). Using the hyperlink you can see which procedures were completed successfully and if any procedure was not completed, you will see it. In this case, you need to contact a specialist to fix this problem.

This completes the update of the 1C: Accounting 8.3 edition 3.0 program, you can start working in the program.

I wish you success

Sergey Golubev

Program 1C:Enterprise 8 ➾ THREE+1 WAYS! Step by step detailed instructions update. Recommendations.

This article will help you easily update the standard configuration yourself in three ways:

download the update distribution from the website,
update via the website without downloading the distribution kit
update using ITS disk
or using the Internet Update Assistant.

Attention! Before updating, always make a backup copy of the current database. Do not update the modified configuration yourself; entrust this task to specialists.

NAVIGATOR BY ARTICLE:

Archival download of the 1C:Enterprise information base 8

To download the information base, you need to run 1C:Enterprise 8 in Configurator mode:

After launching the configurator, select the menu “Administration” - “Upload infobase”:

In the window that appears, indicate the path and name of the file into which you want to upload the infobase, and click “Save”:

If there is drive D in the system: “D:\Archive\accounting”
If there is no D drive in the system, it is recommended to save a copy to external media (flash) or to the path: “C:\Archive\accounting”

Recommended file name for saving, in the format: YEAR MONTH DAY HOUR MINUTE.dt For example, if archiving occurs on February 6, 2013, at 15-30, then the file name should be as follows: 2013 02 0615 30.dt

Important! Before unloading, it is necessary to shut down all users in the 1C:Enterprise 8 system.

Before updating the configuration, you need to look at the current release and edition. To do this, in the Configurator, click the button according to the figure:

In the window that opens, we see the configuration and edition in the top line, and the release in parentheses in the bottom line:

METHOD 1: Update using a file downloaded from the site

Next, you need to open an Internet browser / browser (on any computer) and go to the address Update ITS programs This is the official website of 1C:Enterprise 8 for registered users.

In the window that opens, you must enter your login and password (if you do not know this data, ask your manager to resend it to you by email).

If everything is done correctly, a list of updates for different configurations will open. different countries. Find your configuration:

In the window that opens, select the desired release:

Pay attention! If you missed several releases, then you need to update the configuration gradually. For example, your current release is 2.0.8.2. To update it to the latest 2.0.9.2, you must first update the current one to 2.0.8.3., and only then to 2.0.9.2. The "Update Version" column shows what the current release must be for an update.

In the release window that opens, select “Update distribution”:

After completing step 1. You can begin preparing the configuration update itself. To do this, you need to unpack the update file on the computer on which you need to update 1C:Enterprise 8. To do this, you need to double-click on it

After this, several files will appear in the folder. You need to run the update installation file:

And "Done":

Now the update template is installed in the local directory, and 1C:Enterprise 8 can see it.

In the window that appears, select necessary update and click “Finish”

In the window that appears, click "Continue update"

After this, 1C:Enterprise 8 will offer to update the database configuration. Click "Yes".

For some time, depending on the power of the computer, 1C:Enterprise 8 will freeze, comparing objects. Then in the window that appears, click “Accept”

You can run it in 1C:Enterprise 8 mode and work!

METHOD 2: Updating the configuration directly through the website (without downloading the distribution)

To update, you need to open the following window in configurator mode:

In the window that appears, check the boxes as in the figure

METHOD 3: Update using ITS disk

To update, you must insert the ITS Disk into the CD-ROM, which does not have the inscription “Addendum to the ITS Disk.” The disc will automatically start and in the window that appears, click the “Browse CD” button.

In the window that appears, select the item “Reporting forms, program and configuration releases”

In the window that appears, double-click on “1C:Enterprise 8”

We perform similar actions described above and reach the window in which you need to check the box “Search in current directories for templates and updates”:

We update the configuration in a similar way.

Updating using the Online Update Assistant

Automatic update of standard configuration via the Internet

Here we will consider the method of automatic updating via the Internet of the standard configuration “Accounting 8 for Ukraine”, edition 1.2. The article is also relevant for typical self-supporting and budgetary configurations (see list below).

Important!!! If any changes have been made to the configuration, performing the update according to these instructions may result in the loss of such individual changes.

Updating the configuration via the Internet is performed in the “1C:Enterprise 8” mode, so you must initially launch the program and then select the update assistant.

Update Assistant options for the following configurations:

Name	Path
Configuration
Accounting (BdU), ed. 1.2
Management of a trade enterprise, ed. 1.2	menu “Service” - “Online user support” - “Updating configuration via the Internet”
Trade management, ed. 2.3	menu “Service” - “Updating configuration via the Internet”
Trade management, ed. 3.1	menu “Administration” - “Support and Maintenance” - “Search and install updates”
Manufacturing management, ed. 1.3	menu “Tools” - “Online user support” - “Configuration updates”
Salary and personnel management (ZUP), ed. 2.1	menu “Tools” - “Services” - “Configuration updates”
Managing a small company, ed. 1.6	section “Settings” - “Online user support” - “Search and install updates”
BAS Retail Trade, ed. 1.0
BAS Retail Trade, ed. 2.0	section “Settings and administration” - “Support and maintenance” - “Configuration updates”
Trade for private entrepreneurs (UT for PP), ed. 1.0	menu “Tools” - “Configuration updates”

Important!!! In the file-based system deployment option, before starting the update, you must shut down the users connected to the information base. In the client-server version, active connections are terminated and new connections are blocked automatically.

On the first page of the assistant, you must select the option to receive the update “Custom website on the Internet (recommended)” (Fig. 1).

To automatically check for a configuration update each time you start, you should set the “Check for updates at startup” flag.

If the flag is set, then when running the configuration, the “Update configuration” form will open only if the versions of the kit and the current configuration differ.

Figure 1 – initial opening of the update assistant

If there is an update available on the user site, the system reports the version number, a brief description, the size of the update and offers to install it (Fig. 2).

Figure 2 – information about available update

The next step appears if the user on whose behalf the configuration was entered has a password set. To continue, you must enter a password given user and click on the “Next” button (Fig. 3).

Figure 5 – connection to the site

If for backup are used third party tools, you can disable automatic backup creation using the “Backup” link located at the bottom of the assistant page.

For more information on the procedure for creating a backup copy, see the article “Creating a backup copy of an infobase.”

Figure 6 – backup

Pay attention!

When selecting the reservation option “Create temporary backup copy IB" archived copy of the data is saved in the directory: \Local Settings\Temp\1Cv8Update. * ** file name "backup"<дата>.dt".

When you click on the “Next” button, the assistant will update the 1C:Enterprise 8 configuration (Fig. 7). The configuration update process may take a long time, depending on the performance of the computer and the size of the information base.

Figure 7 – update process

After completing the configuration update, 1C:Enterprise 8 will be automatically restarted. After this, you need to click the “Finish” button and the system will be ready for further work (Fig. 8).

Figure 8 – completion of update

Copying of material is possible only with reference to the source and indication to the author of the material. Thank you for respecting intellectual property rights. TQM systems

Rated 4.20 out of 5 based on 5 ratings

The need to update 1C Enterprise and any products created on this platform is due to maintaining the relevance of their functionality. Updates reflect changes in legislative norms and rules, the release of new forms of regulated reports, expanded functionality, improved interface of solutions, as well as corrections of software bugs. Using the example of 1C: Accounting 8, let's consider updating configuration 3.0 with Internet support, that is, automatic and manual (in principle, these rules apply to any standard 1C configurations, for example, ZUP or UT). Before we begin, let's pay attention to a few important points:

Depending on the settings of 1C:Accounting 8, updates can be made manually or automatically, but in both cases only when all users log out of the database.
Before updating 1C, as well as before any other configuration manipulations, you need to download the database and save it in archive format. In a critical situation, if a failure occurs or updates for some reason come into conflict with the existing system, a saved copy of the database will help you return to the beginning of the process, avoiding losses in settings and data.
If for the program, from the moment last update, for example, three new versions have been released, the process of installing updates will have to be repeated three times.
Before installing standard updates, you should make sure that no modifications have been made to the configuration. Updating a non-standard configuration occurs manually, not automatically, and requires the involvement of a specialist to verify and enter twice changed objects. The lock icon in the configuration window will help you verify this.
Update 1C 7.7, PROF, KORP, as well as 1C 8.2 and others previous versions 1C:Enterprise 8 is possible by purchasing access as part of the 1C:ITS agreement.

First, let's look at the steps if Internet support is available (part of the services provided under the ITS agreement)

Select automatic 1C update

Continue without platform update:

When downloading files for the first time, the information technology support site will request “Login” and “Password” for access.

Independent update of the standard 1C 8.3 configuration

Let's determine the version of the installed configuration:

Launching the database in the “Configurator” mode* will allow you to obtain the necessary information about current version platforms and configurations. In the configuration window opposite “Enterprise Accounting” a padlock icon is displayed, indicating that the configuration is standard.

*Working in the “Configurator” mode is virtually the same for all configurations.

Let's move on to the update. In the “Support” item we find the “Update configuration” item:

The file, or distribution, can be taken from the ITS disk or downloaded from the “1C: Software Update” portal if you have a login/password, in the “Typical configurations for Russia” section:

On the portal, in the far right column, we find our version number and download the corresponding update (since there is ITS, we download it for free):

To select a file, select “Specify the update file” and the path where the “unpacked” newest release is located - the file with resolution .cfu. Click “Open”:

Help information (pay attention to whether the available version of the platform matches the one stated in the window):

Checking update details:

Additional check:

Innovations and changes included in the new configuration:*

*If the “Accept” button in the “Reorganization of Information” window is inactive, you must scroll to the end of the list of changes. At the end of the list there will be marked objects that prevent the installation of the update (for example, duplicated as a result of incorrect termination).

You can solve this problem by running “Testing Fixes”: