For a Taiwanese company, it is customary to release several variations, therefore smartphone Asus Zenfone GO ZB452KG also has similar models. The differences between them lie in some characteristics and screen diagonal. The gadget itself belongs to the budget price category and has only a few distinctive positive aspects.

SPECIFICATIONS

> Supported Internet: 3G, 2G,
> Display with a pixel density of 854 × 480 and a diagonal of 4.5 inches, type capacitive, TFT
> Operating system: Android 5.1.
> Platform: Qualcomm Snapdragon 200 MSM8212 quad-core chipset @ 2.4 GHz and Adreno 302 graphics accelerator
> Internal memory - 16 GB, RAM - 1 GB. MicroSD support up to 64GB
> 2070 mAh lithium battery
> Weight: 125 grams, Dimensions: 136.5 x 66.7 x 11.2 mm
> Cameras: main camera with a resolution of 8 megapixels and f / 2.0 aperture, as well as flash and autofocus; front 0.3 MP
> Support for two micro SIM cards
> Bluetooth 4.0.
> Optional: flashlight, GPS, radio

DESIGN USE

The back panel of the device is made of glossy plastic with a small hole for removing the cover. The surface easily acquires fingerprints and other traces of use. Below is a row of holes for speakers, on top is the main camera module along with a flash and volume buttons. There is also the Asus logo. The perimeter frame is made of smooth plastic and is easily scratched.

There are three touch-sensitive buttons on the bottom of the front panel: home, back and recent apps. On top there is a front camera module, a speaker for talking, a logo and a battery indicator without any other functions. On the top there is a power key along with a headset jack, on the bottom there is a microUSB port and a second spoken microphone. At the same time, both sides of the Asus Zenfone GO do not have functional elements.


available in a variety of colors

Available in several colors: white, gold, dark gray and red. Under the cover there are slots for two medium-standard SIM-cards and a memory card. The kit includes only documentation, a charger and a USB cable.

Uses a TFT type matrix with a resolution of 854 × 480 pixels. At the same time, the viewing angles are quite small, which is typical for this type of screen.


Qualcomm MSM8212 Snapdragon 200 - not all games work

When viewed from the side or from above, the colors are significantly distorted, but when viewed directly, the detail is quite good. The quality of the color temperature is also at an acceptable level. Outside the home, the maximum screen brightness may not be sufficient to read text.


colors dimmer than all IPS displays

The display distinguishes no more than five single presses. Images of photographs or pictures have sufficient elaboration.

The Asus Zenfone GO is equipped with a 5 megapixel main camera with f / 2.0 aperture and multiple shooting modes. In addition to the presence of HDR, it is worth noting the "low light" function, when activated, photos at night are noticeably better. In addition, this smartphone is well adapted to various shooting conditions thanks to the PixelMaster technology. Despite this, practice shows a rather mediocre quality of photographs, especially if they were taken indoors. In daylight, detail and brightness are significantly higher.


the kit includes a power supply and micro USB. Headphones missing

The front camera has a resolution of 0.3 megapixels and is just as poorly suited for Skype conversations or selfies. However, there are several functions for correcting photos, for example, you can remove some skin imperfections and level facial features.

POWER-MEMORY

It uses a quad-core Qualcomm MSM8212 Snapdragon 200 processor. Under heavy workload or using "heavy" games at high settings, the device heats up quite a lot, but this factor is absent during standard use.


two slots for micro SIM cards and a slot for microSD

Asus ZB452KG is based on the Android 5.1 operating system. The amount of built-in memory is 8 GB, of which about 4 GB is available for use.


battery 2700 mAh

For RAM, 1 GB is allocated, there is support for the 3G data rate standard. It is also possible to expand the internal memory using microSD with a maximum capacity of up to 64 GB.

OUTPUT

He is a representative of the budget segment with the appropriate characteristics. There are quite a few color options, as well as support for 3G data rates. The display quality is not bad in practice, but use in sunlight or high angles becomes difficult. The battery capacity is enough to use the functions of the smartphone all day long. In addition, the main purposes in the form of calls and some actions with the Internet are performed quite quickly. There are a large number of different sensors.

Nevertheless, the declared characteristics are sufficient only for the most simple tasks or games with minimal requirements. With the main camera, PixelMaster technology dramatically improves the situation, so the lens can be used to capture simple moments. Due to the small amount of memory, it is necessary to use a memory card to store more capacious data. Thus, the Asus ZB452KG phone is well suited for undemanding users or minor tasks.

> Dear friends! We ask you to leave your feedback on the use of smartphones of the ASUS ZenFone ZB452KG 8GB line in the comments below. For an objective user opinion. Thanks in advance!

Accelerometer(or G-sensor) - sensor of the device's position in space. As a primary function, the accelerometer is used to automatically change the orientation of the display image (vertical or horizontal). Also, the G-sensor is used as a pedometer, it can be controlled by various functions of the device by turning or shaking.
Gyroscope- a sensor that measures the angles of rotation relative to a fixed coordinate system. Able to measure angles of rotation in several planes at the same time. The gyroscope together with the accelerometer allows you to accurately determine the position of the device in space. Devices using only accelerometers have lower measurement accuracy, especially when moving quickly. Also, the capabilities of the gyroscope can be used in modern games for mobile devices.
Light sensor- a sensor, thanks to which the optimal values ​​of brightness and contrast are established for a given illumination level. The presence of the sensor allows to increase the operating time of the device from the rechargeable battery.
Proximity sensor- a sensor that detects when the device is close to the face during a call, turns off the backlight and locks the screen, preventing accidental presses. The presence of the sensor allows to increase the operating time of the device from the rechargeable battery.
Geomagnetic sensor- a sensor for determining the side of the world to which the device is directed. Tracks the orientation of the device in space relative to the earth's magnetic poles. The information received from the sensor is used in cartographic programs for orientation on the ground.
Atmospheric pressure sensor- sensor for accurate measurement of atmospheric pressure. It is part of the GPS system that allows you to determine the height above sea level and speed up the location.
Touch ID- fingerprint identification sensor.

Accelerometer / Geomagnetic / Illumination / Approximation

Satellite navigation:

Gps(Global Positioning System) is a satellite navigation system that measures distance, time, speed and determines the location of objects anywhere on Earth. The system is designed, implemented and operated by the US Department of Defense. The main principle of using the system is to determine the location by measuring the distance to the object from points with known coordinates - satellites. The distance is calculated from the signal propagation delay time from its sending by the satellite to being received by the GPS receiver antenna.
GLONASS(Global Navigation Satellite System) - Soviet and Russian satellite navigation system, developed by order of the USSR Ministry of Defense. The measuring principle is similar to the American GPS navigation system. GLONASS is intended for operational navigation and time support of land, sea, air and space-based users. The main difference from the GPS system is that the GLONASS satellites in their orbital motion do not have resonance (synchronization) with the Earth's rotation, which provides them with greater stability.

Information about the brand, model and alternative names of a specific device, if any.

Design

Information about the dimensions and weight of the device, presented in different units of measurement. Materials used, offered colors, certificates.

Width

Width information - refers to the horizontal side of the device in its standard orientation during use.

66.7 mm (millimeters)
6.67 cm (centimeters)
0.22 ft (feet)
2.63 in (inches)
Height

Height information - refers to the vertical side of the device in its standard orientation during use.

136.5 mm (millimeters)
13.65 cm (centimeters)
0.45 ft (feet)
5.37 in (inches)
Thickness

Information about the thickness of the device in different units of measurement.

11.2 mm (millimeters)
1.12 cm (centimeters)
0.04 ft (feet)
0.44 in (inches)
Weight

Information about the weight of the device in different units of measurement.

125 g (grams)
0.28 lbs (pounds)
4.41 oz (ounces)
Volume

The approximate volume of the device, calculated based on the dimensions provided by the manufacturer. Refers to devices with a rectangular parallelepiped shape.

101.97 cm³ (cubic centimeters)
6.19 in³ (cubic inches)
Colors

Information about the colors in which this device is offered for sale.

The black
White
Blue
Grey
Golden
Red
Yellow
Materials for the manufacture of the case

Materials used for the manufacture of the device body.

Plastic

SIM card

The SIM card is used in mobile devices to store data that certifies the authenticity of mobile service subscribers.

Mobile networks

A mobile network is a radio system that allows multiple mobile devices to communicate with each other.

Mobile technology and data rates

Communication between devices in mobile networks is carried out using technologies that provide different data rates.

Operating system

An operating system is the system software that controls and coordinates the operation of the hardware components on a device.

SoC (System on a Chip)

A system on a chip (SoC) integrates all the major hardware components of a mobile device into a single chip.

SoC (System on a Chip)

A system on a chip (SoC) integrates various hardware components such as a processor, graphics processor, memory, peripherals, interfaces, etc., as well as the software required for their operation.

Qualcomm Snapdragon 200 MSM8212
Technological process

Information about the technological process by which the chip is manufactured. The value in nanometers is half the distance between the elements in the processor.

28 nm (nanometers)
Processor (CPU)

The main function of the processor (CPU) of a mobile device is to interpret and execute instructions contained in software applications.

ARM Cortex-A7
Processor size

The bit size of the processor is determined by the size (in bits) of registers, address buses and data buses. 64-bit processors offer better performance than 32-bit processors, which in turn are more efficient than 16-bit processors.

32 bit
Instruction set architecture

Instructions are commands with which the software sets / controls the operation of the processor. Information about the instruction set (ISA) that the processor can execute.

ARMv7
L2 cache

L2 (level 2) cache is slower than L1, but instead has a larger capacity to cache more data. It, like L1, is much faster than system memory (RAM). If the processor does not find the requested data in L2, it continues to look for them in L3 cache memory (if available) or in RAM memory.

1024 KB (kilobytes)
1 MB (megabytes)
Number of processor cores

The processor core executes program instructions. There are processors with one, two or more cores. Having more cores increases performance by allowing multiple instructions to execute in parallel.

4
CPU clock speed

The clock speed of a processor describes its speed in cycles per second. It is measured in megahertz (MHz) or gigahertz (GHz).

1200 MHz (megahertz)
Graphics processing unit (GPU)

A graphics processing unit (GPU) handles computation for a variety of 2D / 3D graphics applications. In mobile devices, it is most commonly used by games, consumer interfaces, video applications, and more.

Qualcomm Adreno 302
The amount of random access memory (RAM)

Random access memory (RAM) is used by the operating system and all installed applications. The data that is saved in the RAM is lost after the device is turned off or restarted.

1 GB (gigabytes)

Built-in memory

Each mobile device has built-in (non-removable) fixed memory.

Memory cards

Memory cards are used in mobile devices to increase the storage space for data.

Screen

The screen of a mobile device is characterized by its technology, resolution, pixel density, diagonal length, color depth, etc.

Type / technology

One of the main characteristics of the screen is the technology by which it is made and on which the image quality of information directly depends.

TFT
Diagonal

On mobile devices, screen size is expressed in terms of the length of its diagonal, measured in inches.

4.5 in (inches)
114.3 mm (millimeters)
11.43 cm (centimeters)
Width

Approximate screen width

2.2 in (inches)
56 mm (millimeters)
5.6 cm (centimeters)
Height

Approximate screen height

3.92 in (inches)
99.64 mm (millimeters)
9.96 cm (centimeters)
Aspect ratio

The aspect ratio of the long side of the screen to its short side

1.779:1
Resolution

Screen resolution indicates the number of pixels horizontally and vertically on the screen. Higher resolution means sharper image detail.

480 x 854 pixels
Pixel density

Information about the number of pixels per centimeter or inch of the screen. Higher density allows information to be shown on the screen in clearer detail.

218 ppi (pixels per inch)
85 ppcm (pixels per centimeter)
Color depth

Screen color depth reflects the total number of bits used for color components in one pixel. Information about the maximum number of colors that the screen can display.

24 bit
16777216 flowers
Screen footprint

The approximate percentage of the display area on the front of the device.

61.49% (percent)
Other characteristics

Information about other functions and features of the screen.

Capacitive
Multitouch
Scratch resistant

Sensors

Different sensors perform different quantitative measurements and convert physical metrics into signals that can be recognized by the mobile device.

Rear camera

The main camera of a mobile device is usually located on its rear panel and can be combined with one or more additional cameras.

Sensor type

Information about the type of camera sensor. Some of the most widely used types of sensors in mobile cameras are CMOS, BSI, ISOCELL, and others.

CMOS (complementary metal-oxide semiconductor)
Light-strengthf / 2
Flash type

The rear (rear) cameras of mobile devices mainly use LED flashes. They can be configured with one, two or more light sources and vary in shape.

LED
Image Resolution3264 x 2448 pixels
7.99 MP (megapixels)
Video resolution

Information about the maximum video resolution that the camera can record.

1280 x 720 pixels
0.92 MP (megapixels)
Video recording rate (frame rate)

Information about the maximum recording rate (frames per second, fps) supported by the camera at maximum resolution. Some of the most basic video recording speeds are 24 fps, 25 fps, 30 fps, 60 fps.

30 frames / sec (frames per second)
Characteristics

Information about additional software and hardware features of the rear (rear) camera.

Autofocus
Burst shooting
Digital zoom
Geographic tags
Panoramic shooting
HDR shooting
Touch focus
Face recognition
Adjusting the white balance
ISO setting
Exposure compensation
Self-timer
Scene selection mode
5 MP - market dependent

Front-camera

Smartphones have one or more front cameras of different designs - pop-up camera, PTZ camera, notch or hole in the display, camera under the display.

Light-strength

Aperture (also known as aperture, aperture, or f-number) is a measure of the size of the lens aperture, which determines the amount of light entering the sensor. The lower the f-number, the larger the aperture and the more light reaches the sensor. Usually, the f-number is indicated, which corresponds to the maximum aperture of the aperture.

f / 2.4
Image Resolution

Resolution is one of the main characteristics of cameras. It represents the number of horizontal and vertical pixels in the image. For convenience, smartphone manufacturers often quote resolutions in megapixels, indicating the approximate number of pixels in millions.

1600 x 1200 pixels
1.92 MP (megapixels)
0.3 MP - market dependent

Audio

Information about the type of speakers and audio technology supported by the device.

Radio

The radio of the mobile device is a built-in FM receiver.

Locating

Information about the navigation and positioning technologies supported by the device.

Wi-Fi

Wi-Fi is a technology that enables wireless communication for transferring data over short distances between various devices.

Bluetooth

Bluetooth is a standard for secure wireless transfer of data between different types of devices over short distances.

USB

USB (Universal Serial Bus) is an industry standard that allows different electronic devices to exchange data.

Headphone jack

This is an audio connector, which is also called an audio connector. The most widely used standard in mobile devices is the 3.5mm headphone jack.

Connecting devices

Information about other important connection technologies supported by the device.

Browser

A web browser is a software application for accessing and viewing information on the Internet.

Video file formats / codecs

Mobile devices support different video file formats and codecs, which respectively store and encode / decode digital video data.

Colorful state employees always delight, because on the one hand they are available, on the other - the number of available color solutions will always find buyers who prefer to stand out. In addition, there are not so many color solutions: among the proposals, the only thing that catches your eye is the Zenfone Go line. The Asus company decided not to break the established tradition and presented a completely budgetary phone Asus Zenfone Go ZB452KG.

What's new in appearance

Those who are familiar with previous samples of the fifteenth year, for example with smartphone Asus Zenfone Go ZC451TG, they will immediately note that the navigation element, characteristic of many smartphones of the company, has returned to the back panel - the volume rocker. The rest of the design is familiar: in the middle the device is plump, the back slightly protrudes, which is what users of other Asus in arched design are used to. But the edges taper to 3.6 millimeters.

Below, under the display, you can see a proprietary metallic overlay, the power button is located in the center, on the upper edge. By the way, many users will want to buy a smartphone, not only because of the budget price tag: this is the rare case when the diagonal is 4.5 inches, which were usual for past years. But the resolution is only 480x854 pixels. Returning to color schemes, it is worth noting that there are seven of them. Bright tones look especially cheerful: scarlet and lemon.

Technical capabilities

Given that we have an affordable device, one should not expect that it grabs a star from the sky. Responsible for performance is the 200 series snapdragon, which can be considered basic, given the characteristics of expensive devices. For example, a competitor Lenovo A2010 got a media-tech processor, so Asus Zenfone Go ZB452KG looks preferable. There is only 1 gigabyte of RAM in the device, but given the unproductive platform, which is enough for non-gaming everyday tasks, there should not be a lack of RAM. The main memory is also small: only 8 gigabytes, but there is an expansion slot and 100 gigabytes of cloud storage. The main camera received a five or eight megapixel sensor, depending on the version, and surprisingly fast optics with a 2.0 aperture. Be that as it may, this is a smartphone with widespread wireless capabilities: surprisingly even support for glonass and bds is announced.